NextSDS Logo
Safety Data Sheet EN

Strip-o-clean

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Strip-o-clean

Regulatory Identifiers

CAS Number
N/A

Identified Uses

For professional use only.

Manufacturers & Suppliers

E

Ecover Belgium NV

manufacturer

Industrieweg 3, 2390 Malle, Belgium

+32 (0)3 309 25 00

Emergency Contacts

Antipoison Centre Belgium

+32 (0)70 245 245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified na: r-phrases

Hazard Classifications

R10
Skin Corr.
STOT SE

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Propan-2-ol (IPA) EC: 200-661-7 67-63-0 1 - 5% No
Potassium hydroxide EC: 215-181-3 1310-58-3 1 - 5% No
Sodium ethyl hexyl sulfate EC: 204-812-8 126-92-1 1 - 5% No
Alkyl polyglycol ether C10-16 with : PO and EO 69227-22-1 1 - 5% No
2-amino-ethanol EC: 205-483-3 141-43-5 1 - 5% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Fresh air, rest in half sitting position. Seek medical advice.

Symptoms: Irritation of the bronchial tract, narcotic effects, dizziness and headaches may occur with high vapour concentrations.

Skin contact

Rinse affected area thoroughly with water to remove concentrated product. Remove contaminated clothing. Seek medical attention immediately.

Symptoms: Irritation, redness, pain. Prolonged or repeated skin contact causes irritation or dehydration of the skin and may cause burns. Vapours may cause skin irritation.

Eye contact

Rinse immediately and for at least 15 minutes with copious amounts of water (also assure adequate flushing under the eyelids and if possible after having removed contact lenses). Bring the victim to an ophthalmist.

Symptoms: Corrosion, redness, pain. Vapours may be irritating to eyes and may cause corneal damage.

Ingestion

Wash out mouth and do not induce vomiting. Seek medical attention.

Symptoms: Sore throat, coughing , stomachache, diarrhoea, nausea and vomiting.

Immediate Medical Attention

Seek medical advice (inhalation), seek medical attention immediately (skin), bring the victim to an ophthalmist (eye), seek medical attention (ingestion).

Medical Treatment

In case of burns, desinfect and treat as thermic wounds.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

All extinguishing media can be used. Alcoholresistant foam.

Unsuitable media

Do not use a heavy water stream.

Instructions

Exercise caution when fighting any chemical fire. Cool heat-exposed product with water spray.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid contact with skin, eyes and clothes. Wear protective clothing, ensure a good ventilation and avoid all sources of ignition. Pump with explosion-proof equipment.

Environmental

Avoid release to the environment.

Cleanup methods

Pump with explosion-proof equipment.

Materials: sand or inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

No smoking. Avoid contact with skin, eyes and clothes.

Storage

Store in a cool, well ventilated and fireproof area, in tightly closed original packaging. Do not store in direct sunlight.

Fire prevention

Keep away from sparks, open fire and oxidising agents.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Green. Liquid.
Colour
Green
Colour Intensity
---
Form
Liquid
Odor
Pine oil
Odor Threshold
No data available.
Ph
> 13
Melting Point
No data available.
Boiling Point
No data available.
Flash Point
26
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
1.020 kg/l
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
12% vol% IPA-vapour can react explosive with air (relative density of the mixture = 1.05); UL vol% PNP-vapour can react explosive with air
Lower Explosive Limit
2% vol% IPA-vapour can react explosive with air (relative density of the mixture = 1.05); 1,1% vol% PNP-vapour can react explosive with air
Explosive Limits
---
Auto Ignition Temperature
No data available.
Decomposition Temperature
No data available.
Solubility
Complete.
Partition Coefficient
No data available.
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
7.5 %
Metal Corrosion
---
Dynamic Viscosity
13.2 cP
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No decomposition under normal conditions of storage and use.

Hazardous reactions

No data available.

Avoid

Do not store <0°C and >25°C.

Incompatible

Strong oxidising agents (reacts violently, causing fire and explosion hazard), Acids

Decomposition

None.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
2924
Shipping Name
FLAMMABLE LIQUID, CORROSIVE, N.O.S.
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Strip-o-clean?

The signal word is na: r-phrases.

What is the physical form of Strip-o-clean?

Strip-o-clean is a liquid appearing as green. liquid. with green color. It has pine oil odor.

What is the solubility of Strip-o-clean?

Complete.

What is Strip-o-clean used for?

For professional use only.

What is the melting point of Strip-o-clean?

The melting point is No data available. and the boiling point is No data available..