Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Selox Cool
- Product Code
- 585 CLP
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Detergent. For professional use only
Uses advised against
No uses advised against
Manufacturers & Suppliers
Christeyns NV
manufacturer
Afrikalaan 182, 9000 GENT - België
+32 (0)9/ 223 38 71
http://www.christeyns.com
Emergency Contacts
National Poisons Information Service
+44 870 600 6266
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium dodecylbenzenesulfonate EC: 246-680-4 | 25155-30-0 | 8% | Yes |
| Alcohol ethoxylated propoxylated | 120313-48-6 | 5% | Yes |
| Glycerol substance with national workplace exposure limit(s) (GB) EC: 200-289-5 | 56-81-5 | 4.31% | No |
| Ethoxylated Alcohol | --- | 2% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Take victim to fresh air, in a quiet place and if necessary take medical advice.
Symptoms: Presents no particular risk when handled in accordance with good occupational hygiene practice.
Remove all contaminated clothing and footwear. Wash off with plenty of water. In case of faintness or symptoms of skin irritation appear, take medical advice.
Symptoms: To our knowledge, this product does not present any particular risk, provided it is handled in accordance with good occupational hygiene and safety practice.
Rinse immediately and thoroughly, pulling the eyelids well away from the eye (15 minutes minimum). Obtain medical attention if pain, blinking or redness persist.
Symptoms: Causes serious eye damage.
Rinse mouth out with water. Do NOT induce vomiting. Immediately call a POISON CENTER or doctor/physician.
Symptoms: Presents no particular risk when handled in accordance with good occupational hygiene practice.
Immediate Medical Attention
Immediately call a POISON CENTER or doctor/physician (for ingestion). Obtain medical attention if pain, blinking or redness persist (for eye contact). In case of faintness or symptoms of skin irritation appear, take medical advice (for skin contact). In case of doubt or persistent symptoms, consult always a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
In fire case not far from, any kind of extinguisher can be used.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Concerning personal protective equipment to use, see section 8.
No special environmental precautions required.
Shovel into suitable and closed container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not eat, drink or smoke in areas where product is used. After use, container has to be completely emptied and closed. Never mix with other materials.
Store tightly closed in a dry and cool place.
Do not eat, drink or smoke in areas where product is used.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation.
Chemical resistant PVC/Nitrilrubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.
Safety glasses with side-shields (EN 166).
Wear suitable protective clothing (EN 14605).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored normally.
No additional information available
No additional information available
humid air.
Never mix with other materials.
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Selox Cool?
The signal word is danger.
What is the physical form of Selox Cool?
Selox Cool is a liquid with white to light yellow. color. It has perfumed. odor.
What is the solubility of Selox Cool?
No data available
What is Selox Cool used for?
Detergent. For professional use only
What are the hazard statements for Selox Cool?
This substance has 1 hazard statement:
- H318: Causes serious eye damage
What is the melting point of Selox Cool?
The melting point is < 0 °C and the boiling point is No data available.