Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TANET SR 15 10x1 l
- Product Code
- 61268
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning agent
Manufacturers & Suppliers
tana Chemie GmbH
manufacturer
Rheinallee 96, 55120 Mainz
+49613196403
Emergency Contacts
Emergency Contact
+49(0)6131-19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous surfactant solution.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethanol EC: 200-578-6 | 64-17-5 | 2 - 5% | Yes |
| Alcohols, C12-14, ethoxylated, sulfates, sodium salts | 68891-38-3 | 2.5 - 3% | Yes |
| D-Glucopyranose, oligomers, decyl octyl glycosides | 68515-73-1 | 1 - 2% | Yes |
| Alcohols, C10-16, ethoxylated propoxylated | 69227-22-1 | 1 - 2% | Yes |
| 1-phenoxypropan-2-ol EC: 212-222-7 | 770-35-4 | 1 - 2% | Yes |
| 2-phenoxyethanol EC: 204-589-7 | 122-99-6 | 1 - 2% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of dust or fumes from overheating or combustion. If symptoms persist, call a physician.
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water.
Protect unharmed eye. If easy to do, remove contact lens, if worn. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If eye irritation persists, consult a specialist.
Clean mouth with water and drink afterwards plenty of water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. Obtain medical attention.
Immediate Medical Attention
Consult a physician. Obtain medical attention.
Medical Treatment
For specialist advice physicians should contact the Poisons Information Service.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not flush into surface water or sanitary sewer system.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Sweep up and shovel.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid formation of aerosol. Avoid contact with skin and eyes. For personal protection see section 8. No special handling advice required. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations.
Keep container tightly closed in a dry and well-ventilated place. Store at room temperature in the original container. Protect from frost.
When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
not required under normal use. For prolonged or repeated contact use protective gloves. It is suggested the usage of chemical resistant gloves made of butyl rubber or nitrile rubber category III according to EN 374-1: 2003 (0,4 mm). As alternative, a different type of gloves might be used if, accordingly to the recommendations of the producer, guarantee the same level of protection. Remarks: Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
not required under normal use
not required under normal use
not required under normal use
Do not flush into surface water or sanitary sewer system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No dangerous reaction known under conditions of normal use.
No hazards to be specially mentioned.
Protect from frost.
No data available
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TANET SR 15 10x1 l?
The signal word is no signal word.
What is the physical form of TANET SR 15 10x1 l?
TANET SR 15 10x1 l is a liquid appearing as liquid with blue color. It has characteristic odor.
What is TANET SR 15 10x1 l used for?
Cleaning agent
What is the melting point of TANET SR 15 10x1 l?
The melting point is No data available and the boiling point is No data available.