NextSDS Logo
Safety Data Sheet EN

210072 Onthardingszout

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
210072 Onthardingszout
Product Code
210072

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Water-Softening Salt (AISE_SUMI_PW_3_2 // AISE_SUMI_PW_8a_2)

Manufacturers & Suppliers

BOMA logo

BOMA

distributor

Noorderlaan 131, B2030 Antwerpen

003232313389

http://www.boma.eu/

Emergency Contacts

Emergency Contact

+32 70 245 245

Nationaal Vergiftigingen Informatie Centrum (NVIC)

+31 88 755 8000

Emergency Contact

+ 33 (0)1 45 42 59 59

Emergency Contact

(+352) 8002-5500

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

For the full text of the H phrases mentioned in this section, see section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

In case of serious or continuous discomforts: remove to fresh air and seek medical attention.

Skin contact

Rinse with water.

Eye contact

Rinse first with plenty of water, if necessary seek medical attention.

Symptoms: Redness

Ingestion

Rinse first with plenty of water, if necessary seek medical attention.

Symptoms: Diarrhoea, headache, abdominal cramps, sleepiness, vomiting

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, foam, powder, sprayed water

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not walk into or touch spilled substances and avoid inhalation of fumes, smoke, dusts and vapours by staying up wind. Remove any contaminated clothing and used contaminated protective equipment and dispose of it safely.

Environmental

Do not allow to flow into sewers or open water.

Cleanup methods

If possible, remove by using absorbent material.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle with care to avoid spillage.

Storage

Keep in a sealed container in a closed, frost-free, ventilated room.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

The level of protection and types of controls necessary will vary depending upon potential exposure conditions. Adequate ventilation should be provided so that exposure limits are not exceeded. For further information, check section 7.

Eyes

Keep an eye-rinse bottle within reach. Tight-fitting safety goggles. Wear a face shield and protective suit in case of exceptional processing problems.

Respiratory

Respiratory protection is not required. Use ABEK type gas masks in case of irritating exposure. If necessary, use with sufficient exhaust ventilation.

Skin/Body

Wear impermeable clothing.

Environmental

Comply with applicable environmental regulations limiting discharge to air, water and soil. Protect the environment by applying appropriate control measures to prevent or limit emissions. For further information, check sections 6 and 13.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Softening Point
---
Solubility In Fat
---
Colour Intensity
---
Freezing Point
---
Molecular Weight
---
Flash Point
---
Density
---
Partition Coefficient
Not applicable
Crystallisation Point
---
Physical State
Solid
Bulk Density
---
Decomposition Temperature
---
Physical State Data
solid
Voc Content
/
Lower Explosive Limit
---
Metal Corrosion
---
Melting Point
---
Appearance
Solid
Form
---
Ph
7.5
Relative Evaporation Rate
---
Odor
characteristic
Properties Status
---
Solubility
---
State Under Standard Conditions
---
Auto Ignition Temperature
---
Upper Explosive Limit
---
Kinematic Viscosity
---
Solidification Point
---
Colour
colourless
Evaporation Rate
/
Cloud Point
---
Odor Threshold
---
Dynamic Viscosity
/
Solubility In Water
Completely soluble
Explosive Limits
---
Vapor Density
Not applicable
Flammability
Not applicable
Boiling Point
---
Vapor Pressure
---
Relative Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Extremely high or low temperatures.

Reactivity

Stable under normal conditions.

Avoid

Protect from sunlight and do not expose to temperatures exceeding + 50°C.

Decomposition

Under recommended usage conditions, hazardous decomposition products are not expected.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 210072 Onthardingszout?

The signal word is no signal word.

What is the physical form of 210072 Onthardingszout?

210072 Onthardingszout is a solid appearing as solid with colourless color. It has characteristic odor.

What is 210072 Onthardingszout used for?

Water-Softening Salt (AISE_SUMI_PW_3_2 // AISE_SUMI_PW_8a_2)