NextSDS Logo
Safety Data Sheet EN

Blitz Interior

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Blitz Interior

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaner (AISE_SUMI_PW_8a_2 // AISE_SUMI_PW_10_1 // AISE_SUMI_PW_11_1 // AISE_SUMI_PW_19_1)

Manufacturers & Suppliers

BOMA logo

BOMA

Noorderlaan 131, B2030 Antwerpen

003232313389

http://www.boma.eu/

Emergency Contacts

Emergency Contact

+32 70 245 245

Emergency Contact

+31 30 274 88 88

Emergency Contact

+ 33 (0)1 45 42 59 59

Emergency Contact

(+352) 8002-5500

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Isopropanol EC: 200-661-7 67-63-0 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Let sit upright, fresh air, rest and take to hospital.

Skin contact

Remove contaminated clothing, rinse skin with plenty of water, if necessary seek medical attention.

Eye contact

Thoroughly rinse with water (contact lenses to be removed if this is easily done) then take to physician.

Symptoms: Redness

Ingestion

Rinse mouth, do not induce vomiting, take to hospital immediately.

Symptoms: Diarrhoea, headache, abdominal cramps, sleepiness, vomiting

Immediate Medical Attention

Take to hospital immediately for ingestion and inhalation. Seek medical attention for eye contact and if necessary for skin contact.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, foam, powder, sprayed water

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not walk into or touch spilled substances and avoid inhalation of fumes, smoke, dusts and vapours by staying up wind. Remove any contaminated clothing and used contaminated protective equipment and dispose of it safely.

Environmental

Do not allow to flow into sewers or open water.

Cleanup methods

If possible, remove by using absorbent material.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle with care to avoid spillage.

Storage

Keep in a sealed container in a closed, frost-free, ventilated room.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

If necessary, use with sufficient exhaust ventilation.

Hands

Handling with nitril-gloves (EN 374). Breakthrough time: >480' Material thickness: 0,35 mm. Thoroughly check gloves before use. Take of the gloves properly without touching the outside with your bare hands. The manufacturer of the protective gloves has to be consulted about the suitability for a specific work station.

Eyes

Tight-fitting safety goggles. Wear a face shield and protective suit in case of exceptional processing problems.

Respiratory

Respiratory protection is not required. Use ABEK type gas masks in case of irritating exposure.

Skin/Body

Wear impermeable clothing. The type of protective equipment depends on the concentration and amount of hazardous substances at the work station in question.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Boiling Point
82 °C — 173 °C
Flammability
Not applicable
Auto Ignition Temperature
---
Density
---
Evaporation Rate
1.300
Lower Explosive Limit
---
Bulk Density
---
Crystallisation Point
---
Odor
characteristic
Vapor Density
Not applicable
Dynamic Viscosity
1 mPa.s
Kinematic Viscosity
1 mm²/s
Odor Threshold
Not applicable
Melting Point
0 °C
Partition Coefficient
Not applicable
Solubility
---
Relative Evaporation Rate
---
Colour
---
Relative Density
0.9930 kg/l
Vapor Pressure
---
Properties Status
---
Freezing Point
---
Explosive Limits
---
Molecular Weight
---
Colour Intensity
---
Upper Explosive Limit
---
Cloud Point
---
Solubility In Water
Completely soluble
Decomposition Temperature
---
Physical State Data
liquid
Flash Point
49 °C
Form
---
Voc Content
4.70 %
Ph
9.8
Appearance
Liquid
Solubility In Fat
---
State Under Standard Conditions
---
Physical State
Liquid
Metal Corrosion
---
Solidification Point
---
Softening Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Reactivity

Stable under normal conditions.

Avoid

Extremely high or low temperatures.

Incompatible

Acids, alkalines, oxidants, reductants

Decomposition

Under recommended usage conditions, hazardous decomposition products are not expected.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Blitz Interior?

The signal word is no signal word.

What is the physical form of Blitz Interior?

Blitz Interior is a liquid appearing as liquid . It has characteristic odor.

What is Blitz Interior used for?

Cleaner (AISE_SUMI_PW_8a_2 // AISE_SUMI_PW_10_1 // AISE_SUMI_PW_11_1 // AISE_SUMI_PW_19_1)

What is the melting point of Blitz Interior?

The melting point is 0 °C and the boiling point is 82 °C — 173 °C.