NextSDS Logo
Safety Data Sheet EN

Dust Remover - 300 grs

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Dust Remover - 300 grs
Product Form
Mixture
Product Code
771006

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial/Professional use spec : Industrial For professional use only

Uses advised against

No additional information available

Manufacturers & Suppliers

COMPUCLEAN Sces logo

COMPUCLEAN Sces

8 rur des MARINIERS, 75014 PARIS – France

09 54 98 24 36

http://www.compuclean.fr

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Aerosol Cat. 3 H229

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H229 Pressurised container: May burst if heated

Precautionary Statements

P102 Keep out of reach of children
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P211 Do not spray on an open flame or other ignition source
P251 Do not pierce or burn, even after use
P260 Do not breathe spray
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
1,1,1,2-Tétrafluoroéthane EC: 212-377-0 811-97-2 80 - 90% Yes
1,1-Difluoroéthane EC: 200-866-1 75-37-6 10 - 20% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Allow victim to breathe fresh air. Allow the victim to rest. Obtain medical attention if breathing difficulty persists.

Symptoms: Narcotic effect. CNS depression. Cardiac disorders.

Skin contact

In the event of contact with the liquid: treat resulting frostbite as a burn. Immediately remove contaminated clothing or footwear. Wash immediately with lots of water. If skin burns appear, call a doctor immediately.

Symptoms: Contact of refrigerant and/or packaging with skin may cause frostbite.

Eye contact

In case of eye contact, immediately rinse with clean water for 10-15 minutes. Consult an eye specialist immediately.

Symptoms: Contact with the liquefied gas may cause severe ocular lesions.

Ingestion

Ingestion unlikely.

Symptoms: Ingestion unlikely.

Immediate Medical Attention

Obtain medical attention if breathing difficulty persists. If skin burns appear, call a doctor immediately. Consult an eye specialist immediately.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide. Foam. Powder. Water spray.

Unsuitable media

None, to our knowledge.

Specific hazards

Fire hazard : Not flammable.

Instructions

Exercise caution when fighting any chemical fire. During a fire, projections ignited aerosol that burst under excessive pressure have to be controlled. To avoid overpressure, cool aerosols with water.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not touch spilled material. Evacuate area.

Environmental

No additional information available

Cleanup methods

Mechanically ventilate the spillage area.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Good ventilation of the workplace required. Use only properly specified equipment which is suitable for this product, its supply pressure and temperature. Not to be used for any purpose other than the one the product was designed for. Do not breathe gas, fumes, vapour or spray. During the handling of a pallet, you have to take all precaution to avoid a start of an accident perforation of the aerosol by a fork-lift truck. During the load and unloading of the vehicle, you have to take all the precaution to avoid a fall a aerosol. Do not spray the aerosol neither close nor towards a flame, a white-hot body, an electrical appliance in running. DO NOT SMOCKING. Container under pressure. Do not drill or burn even after use. Store and handle as though always a serious potential fire/explosion and health hazard exists.

Storage

Recommendations applicable to warehouses and reserves which are stored aerosols. It is recommended to de-normalize aerosols in stock. The "aerosol" or area must be set with a wire mesh of mesh max 5cm, forming a cage or using walls to avoid splashing the aerosols may ignite rest of the stock. Do not smoke. To reduce the risk of falling, should position the pallet closest to the ground. If the packages are stacked, it should ensure that those lower layers do not crash (risk of leakage through compression). It is recommended : - Ventilate the premises and not store any sprays near heat sources, including sunlight, sparks and open flames - To use the procedure of fire when working. Store in a dry, well ventilated place.

Hygiene

Do not eat, drink or smoke during work. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

Fire prevention

Do not spray the aerosol neither close nor towards a flame, a white-hot body, an electrical appliance in running. DO NOT SMOCKING.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide local exhaust or general room ventilation.

Hands

None under normal conditions.

Eyes

No special eye protection equipment recommended under normal conditions of use.

Respiratory

No special respiratory protection equipment is recommended under normal conditions of use with adequate ventilation.

Skin/Body

No special clothing/skin protection equipment is recommended under normal conditions of use.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Gas
Physical State Data
gas
State Under Standard Conditions
---
Appearance
---
Colour
Colourless.
Colour Intensity
---
Form
---
Odor
slightly ethereal.
Odor Threshold
No data available
Ph
No data available
Melting Point
No data available
Boiling Point
-26,4 °C
Flash Point
Not applicable
Freezing Point
No data available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
No data available
Evaporation Rate
---
Vapor Pressure
No data available
Vapor Density
---
Relative Density
No data available
Bulk Density
---
Density
1,18
Flammability
No data available
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
No data available
Partition Coefficient
No data available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
No data available
Kinematic Viscosity
No data available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable at normal handling and storage conditions.

Reactivity

No additional information available

Hazardous reactions

None under normal conditions.

Avoid

Heat. Open flame. Direct sunlight. Sparks.

Incompatible

Strong oxidizing agents. Alkalis and caustic products. Aerosol cases in metal, do not bring into contact with oxidize, acids or basis.

Decomposition

Carbon dioxide. Thermal decomposition generates : Carbon monoxide. Hydrogen fluoride.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS
Transport Class
2.2
Packing Group
Not applicable
IMDG

63, 190, 277, 327, 344, 959

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Dust Remover - 300 grs?

The signal word is warning.

What is the physical form of Dust Remover - 300 grs?

Dust Remover - 300 grs is a gas with colourless. color. It has slightly ethereal. odor.

What is the solubility of Dust Remover - 300 grs?

No data available

What is Dust Remover - 300 grs used for?

Industrial/Professional use spec : Industrial For professional use only

What are the hazard statements for Dust Remover - 300 grs?

This substance has 1 hazard statement:

  • H229: Pressurised container: May burst if heated

What is the melting point of Dust Remover - 300 grs?

The melting point is No data available and the boiling point is -26,4 °C.