Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TASKI Jontec Shine & Care
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- PKEK-T1SG-4002-WAQF
Identified Uses
Floor polish/impregnating agent. For professional use only.
Uses advised against
Uses other than those identified are not recommended.
Manufacturers & Suppliers
Diversey Europe Operations BV
manufacturer
De Corridor 4, 3621ZB Breukelen [Maarssenbroeksedijk 2, 3542DN Utrecht], The Netherlands
Diversey Belgium
national supplier
Haachtsesteenweg 672, 1910 Kampenhout, België / Belgique / Belgien
016-617777
Emergency Contacts
Antigifcentrum / Centre Antipoisons / Antigiftzentrum
070-245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| (2-methoxymethylethoxy)propanol EC: 252-104-2 | 34590-94-8 | 1 - 3% | No |
| tetraamminezinc(2+) carbonate EC: 254-099-2 | 38714-47-5 | 0.1 - 1% | Yes |
| 1,2-benzisothiazol-3(2H)-one EC: 220-120-9 | 2634-33-5 | 0.01 - 0.1% | Yes |
| 2-methyl-2H-isothiazol-3-one EC: 220-239-6 | 2682-20-4 | 0.01% | Yes |
| 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) | 55965-84-9 | 0.01% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Wash skin with plenty of lukewarm, gently flowing water. If skin irritation occurs: Get medical advice or attention.
Symptoms: No known effects or symptoms in normal use.
Rinse cautiously with water for several minutes. If irritation occurs and persists, get medical attention.
Symptoms: No known effects or symptoms in normal use.
Rinse mouth. Immediately drink 1 glass of water. Never give anything by mouth to an unconscious person. Get medical attention or advice if you feel unwell.
Symptoms: No known effects or symptoms in normal use.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.
No special hazards known.
Firefighter Protection
As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No special measures required.
Dyke to collect large liquid spills.
Dilute with plenty of water.
Absorb with liquid-binding material. Collect in closed and suitable containers for disposal.
Materials: sand, diatomite, universal binders
Related Products
Similar products with comparable safety profiles
TASKI Jontec Extra & Care
UFI: UEEK-T1DP-H002-KNJA
TASKI Jontec Resitol F2j
UFI: KTNJ-M1KH-800Y-PS9K
TASKI Jontec OmniStrip F1e
UFI: FYP5-X046-U00U-0YFR
TASKI Jontec OmniStrip F1e
UFI: FYP5-X046-U00U-0YFR
TASKI JONTEC TENSOL
---
TASKI Sani Clonet Pur-Eco W4f
UFI: TMU0-P0J3-J00A-R73S
Hipro Inox Shine
UFI: 3W71-E06S-M008-GGNK
290006 290506 314176 Trio Floor Shine
UFI: 9W41-7K2F-9X14-EHAN
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey.
Store in accordance with local and national regulations. Store in a closed container. Keep only in original packaging.
Wash hands before breaks and at the end of workday.
No special precautions required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Rinse and dry hands after use. For prolonged contact protection for the skin may be necessary.
Safety glasses are not normally required. However, their use is recommended in those cases where splashes may occur when handling the product (EN 16321).
No special requirements under normal use conditions.
No special requirements under normal use conditions.
No special requirements under normal use conditions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage and use conditions.
No reactivity hazards known under normal storage and use conditions.
No hazardous reactions known under normal storage and use conditions.
None known under normal storage and use conditions.
None known under normal use conditions.
None known under normal storage and use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TASKI Jontec Shine & Care?
The signal word is no signal word.
What is the physical form of TASKI Jontec Shine & Care?
TASKI Jontec Shine & Care is a liquid with milky, white color. It has odourless odor.
What is TASKI Jontec Shine & Care used for?
Floor polish/impregnating agent. For professional use only.
What are the hazard statements for TASKI Jontec Shine & Care?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of TASKI Jontec Shine & Care?
The melting point is Not determined and the boiling point is Not determined.