Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Omo Colour Professional Powder
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- F9NK-91MF-000N-HY5G
Identified Uses
Laundry detergent.
Uses advised against
Uses other than those identified are not recommended.
Manufacturers & Suppliers
Diversey Europe Operations BV
De Corridor 4, 3621ZB Breukelen [Maarssenbroeksedijk 2, 3542DN Utrecht], The Netherlands
Diversey Belgium
Haachtsesteenweg 672, 1910 Kampenhout, België / Belgique / Belgien
016-617777
Emergency Contacts
Antigifcentrum / Centre Antipoisons / Antigiftzentrum
070-245245
NL, FR, DE
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| sodium carbonate EC: 207-838-8 | 497-19-8 | 10 - 20% | Yes |
| disodium disilicate EC: 215-687-4 | 1344-09-8 | 3 - 10% | Yes |
| sodium alkylbenzenesulphonate EC: 270-115-0 | 68411-30-3 | 3 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Wash skin with plenty of lukewarm, gently flowing water. If skin irritation occurs: Get medical advice or attention.
Symptoms: Causes irritation.
Hold eyelids apart and flush eyes with plenty of lukewarm water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation occurs and persists, get medical attention.
Symptoms: Causes severe irritation.
Rinse mouth. Immediately drink 1 glass of water. Never give anything by mouth to an unconscious person. Get medical attention or advice if you feel unwell.
Symptoms: No known effects or symptoms in normal use.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.
No special hazards known.
Firefighter Protection
As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter drainage system, surface or ground water.
Collect mechanically. Do not place spilled materials back into the original container. Collect in closed and suitable containers for disposal.
Related Products
Similar products with comparable safety profiles
Boma Prof Color
---
211066 Boma Prof Color
UFI: USVM-MTH5-N10V-AY83
Ariel Professional All in 1 Pods - Colour
---
210371 Boma Prof White Waspoeder
UFI: UVAM-KH58-6D08-28PY
210370 Boma Prof Compact Waspoeder
UFI: G8NH-H0V1-000R-CRQ1
LIQUITEX PROFESSIONAL HEAVY BODY ACRYLIC COLOURS
---
PBS 10X POWDER
---
Professional Oxy Triple Action Formula
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Use only with adequate ventilation. Keep away from food, drink and animal feeding stuffs. Keep out of reach of children. Do not mix with other products unless advised by Diversey.
Store in accordance with local and national regulations. Store in a closed container. Keep only in original packaging. Keep out of reach of children.
Follow general hygiene considerations recognised as common good workplace practices. Keep away from food, drink and animal feeding stuffs. Keep out of reach of children. Do not mix with other products unless advised by Diversey. Wash face, hands and any exposed skin thoroughly after handling. Take off contaminated clothing. Wash contaminated clothing before reuse.
No special precautions required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special requirements under normal use conditions.
Rinse and dry hands after use. For prolonged contact protection for the skin may be necessary. Repeated or prolonged contact: Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber Penetration time: ≥ 480 min Material thickness: ≥ 0.7 mm. Suggested gloves for protection against splashes: Material: nitrile rubber Penetration time: ≥ 30 min Material thickness: ≥ 0.4 mm. In consultation with the supplier of protective gloves a different type providing similar protection may be chosen.
No special requirements under normal use conditions.
No special requirements under normal use conditions.
No special requirements under normal use conditions.
No special requirements under normal use conditions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage and use conditions.
No reactivity hazards known under normal storage and use conditions.
No hazardous reactions known under normal storage and use conditions.
None known under normal storage and use conditions.
None known under normal use conditions.
None known under normal storage and use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Omo Colour Professional Powder?
The signal word is warning.
What is the physical form of Omo Colour Professional Powder?
Omo Colour Professional Powder is a solid appearing as powder with speckles, white color. It has product specific odor.
What is Omo Colour Professional Powder used for?
Laundry detergent.
What are the hazard statements for Omo Colour Professional Powder?
This substance has 1 hazard statement:
- H315: Causes skin and serious eye irritation.
What is the melting point of Omo Colour Professional Powder?
The melting point is Not determined and the boiling point is Not determined.