NextSDS Logo
Safety Data Sheet EN

Suma Break up D3.5

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Suma Break up D3.5

Regulatory Identifiers

CAS Number
N/A

Identified Uses

For professional use only. AISE-P303 - Kitchen cleaner. Manual process AISE-P304 - Kitchen cleaner. Spray and wipe manual process

Uses advised against

Uses other than those identified are not recommended

Manufacturers & Suppliers

D

Diversey Europe Operations BV

Maarssenbroeksedijk 2, 3542DN Utrecht, The Netherlands

D

Diversey Ltd

Weston Favell Centre, Northampton NN3 8PD, United Kingdom

01604 405311

Emergency Contacts

Emergency Contact

0800 052 0185

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H315 Causes skin irritation.
H318 Causes serious eye damage.

Precautionary Statements

P280 Wear eye or face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTRE, doctor or physician.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
disodium metasilicate EC: 215-687-4 --- 3 - 10% Yes
sodium alkylbenzenesulphonate EC: 290-656-6 --- 1 - 3% Yes
sodium cumenesulphonate EC: 239-854-6 --- 1 - 3% Yes
alkyl alcohol ethoxylate 68439-46-3 1 - 3% Yes
cocoamidopropyl betaine hydrogenated --- 1 - 3% Yes
sodium hydroxide EC: 215-185-5 1310-73-2 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Skin contact

Take off immediately all contaminated clothing and wash it before re-use.

Symptoms: Causes irritation.

Eye contact

Hold eyelids apart and flush eyes with plenty of lukewarm water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTRE, doctor or physician.

Symptoms: Causes severe or permanent damage.

Ingestion

Rinse mouth. Immediately drink 1 glass of water. Never give anything by mouth to an unconscious person. Get medical attention or advice if you feel unwell.

Symptoms: No known effects or symptoms in normal use.

Immediate Medical Attention

Immediately call a POISON CENTRE, doctor or physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.

Specific hazards

No special hazards known.

Firefighter Protection

As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Large spill

Dyke to collect large liquid spills.

Environmental

Do not allow to enter drainage system, surface or ground water. Dilute with plenty of water.

Cleanup methods

Absorb with liquid-binding material (sand, diatomite, universal binders, sawdust). Do not place spilled materials back into the original container. Collect in closed and suitable containers for disposal.

Materials: sand, diatomite, universal binders, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash face, hands and any exposed skin thoroughly after handling. Take off contaminated clothing. Wash contaminated clothing before reuse. Avoid contact with eyes. Use only with adequate ventilation.

Storage

Store in a closed container. Keep only in original packaging.

Hygiene

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash face, hands and any exposed skin thoroughly after handling. Take off contaminated clothing. Wash contaminated clothing before reuse. Avoid contact with eyes.

Fire prevention

No special precautions required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Undiluted: If the product is diluted by using specific dosing systems with no risk of splashes or direct skin contact, the personal protection equipment as described in this section is not required. Diluted: Provide a good standard of general ventilation.

Hands

Undiluted: Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber Penetration time: ≥ 480 min Material thickness: ≥ 0.7 mm. Suggested gloves for protection against splashes: Material: nitrile rubber Penetration time: ≥ 30 min Material thickness: ≥ 0.4 mm. In consultation with the supplier of protective gloves a different type providing similar protection may be chosen. Diluted: No special requirements under normal use conditions.

Eyes

Undiluted: Safety glasses or goggles (EN 166). Diluted: No special requirements under normal use conditions.

Respiratory

No special requirements under normal use conditions.

Skin/Body

No special requirements under normal use conditions.

Environmental

No special requirements under normal use conditions.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Clear, Yellow
Colour Intensity
---
Form
---
Odor
Product specific
Odor Threshold
Not applicable
Ph
> 12 (neat)
Melting Point
Not determined
Boiling Point
Not determined
Flash Point
not determined
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined
Vapor Pressure
Not determined
Vapor Density
Not determined
Relative Density
≈ 1.10 (20 °C)
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
Not determined
Decomposition Temperature
Not applicable.
Solubility
---
Partition Coefficient
---
Solubility In Water
Fully miscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
Not corrosive
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal storage and use conditions.

Reactivity

No reactivity hazards known under normal storage and use conditions.

Hazardous reactions

No hazardous reactions known under normal storage and use conditions.

Avoid

None known under normal storage and use conditions.

Incompatible

Reacts with acids.

Decomposition

None known under normal storage and use conditions.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Suma Break up D3.5?

The signal word is danger.

What is the physical form of Suma Break up D3.5?

Suma Break up D3.5 is a liquid with clear, yellow color. It has product specific odor.

What is Suma Break up D3.5 used for?

For professional use only. AISE-P303 - Kitchen cleaner. Manual process AISE-P304 - Kitchen cleaner. Spray and wipe manual process

What are the hazard statements for Suma Break up D3.5?

This substance has 2 hazard statements:

  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.

What is the melting point of Suma Break up D3.5?

The melting point is Not determined and the boiling point is Not determined.