Arvox Pro Stein + Beton A

Upon breathing difficulties or irritation of the respiratory tract: Bring the person into fresh air and stay with him/her.

Symptoms: adverse effects to lungs, irritations and burns in the respiratory organs as well as coughing

Flush exposed area with water for a long time - at least 30 minutes. It may be necessary to flush for several hours. Use a comfortable water temperature (20-30 °C). Contact Poison Information/doctor/hospital for further advice on follow-up and treatment. Remove contaminated clothing and shoes immediately. Ensure to wash exposed skin thoroughly with water and soap. Skin cleanser can be used. DO NOT use solvents or thinners.

Symptoms: Skin irritation

If in eyes: Flush eyes with plenty of water or salt water (20-30 °C) for at least 30 minutes and continue until irritation stops. Remove contact lenses. Make sure you flush under the upper and lower eyelids. Seek medical assistance immediately and continue flushing during transport.

Symptoms: irreversible effects

In the case of ingestion, contact a doctor immediately. If the person is conscious, give them water. DO NOT try to induce vomiting unless this is recommended by a doctor. Hold head facing down to prevent vomit from returning to the mouth and throat. Prevent shock by keeping the injured person warm and calm. Initiate immediate resuscitation if breathing stops. If unconscious, roll the injured person into recovery position. Call an ambulance.

Not applicable.

Fire will result in dense smoke. Exposure to combustion products may harm your health.

Closed containers, which are exposed to fire, should be cooled with water.

Avoid direct contact with spilled substances. Contaminated areas may be slippery.

Avoid discharge to lakes, streams, sewers, etc.

cleaning should be performed with normal cleaning agents. Avoid use of solvents.

Avoid direct contact with the product.

Dry, cool and well ventilated

Smoking, drinking and consumption of food is not allowed in the work area.

Ensure that eyewash stations and safety showers are located within easy reach.

4H (Glove thickness: 0,068 - 0,084 mm, Breakthrough time: > 480 min, Standards: EN374-2, EN374-3, EN388); Cotton/Nitril (Breakthrough time: > 240 min, Standards: EN374-2, EN374-3, EN388). When handling chemical agents, only chemical protective gloves with a CE mark including a four-digit test number may be worn. The design of chemical protective gloves must be selected specifically for the workplace, depending on the concentration and quantity of hazardous substances. It is recommended to clarify the chemical resistance of the above-mentioned protective gloves for special applications with the glove manufacturer.

Safety glasses with side shields. EN166

Respiratory protection is not needed in the event of adequate ventilation. Wear respiratory protection in case of insufficient ventilation.

Dedicated work clothing should be worn. Wear a protective suit in the event of prolonged periods of work with the product.

Keep damming materials near the workplace. If possible, collect spillage during work.

The product is stable under the conditions, noted in section 7 "Handling and storage".

No data available.

None known.

None known.

Acids, Aluminium, Light metal, Organic peroxides, Zinc, Strong oxidizing agents

Thermal decomposition may produce corrosive vapours.