Anticalc powder 3kg - ACTIFF

Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised cleaner. Watch out for any remaining product between skin and clothing, watches, shoes, etc.

Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open.

Symptoms: redness, pain or visual impairment

Do not give the patient anything orally. In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water and consult a doctor.

A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health.

Do not breathe in smoke.

Consult the safety measures listed under headings 7 and 8. For non first aid worker: Avoid any contact with the skin and eyes. For first aid worker: First aid workers will be equipped with suitable personal protective equipment (See section 8).

Prevent any material from entering drains or waterways.

Retrieve the product by mechanical means (sweeping/vacuuming).

Prevent access by unauthorised personnel. Observe precautions stated on label and also industrial safety regulations. Avoid eye contact with this mixture at all times.

Keep out of reach of children.

Always wash hands after handling. Remove and wash contaminated clothing before re-using. No smoking, eating or drinking in areas where the mixture is used.

Prevent access by unauthorised personnel.

Ensure that there is adequate ventilation, especially in confined areas.

Wear suitable protective gloves in the event of prolonged or repeated skin contact. Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN374. Gloves must be selected according to the application and duration of use at the workstation. Protective gloves need to be selected according to their suitability for the workstation in question : other chemical products that may be handled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required. Recommended properties : - Impervious gloves in accordance with standard EN374

Avoid contact with eyes. Before handling powders or dust emission, wear mask goggles in accordance with standard EN166. Prescription glasses are not considered as protection. Provide eyewash stations in facilities where the product is handled constantly.

Avoid breathing dust. Type of FFP mask : Wear a disposable half-mask dust filter in accordance with standard EN149.

Avoid skin contact. Wear suitable protective clothing. These clothes shall be chosen to ensure there is no inflammation or irritation of the skin at the neck and wrist by contact with the powder. Suitable type of protective clothing : Wear protective clothing against solid chemicals and particles suspended in the air (type 5) in accordance with standard EN13982-1 to prevent skin contact. Work clothing worn by personnel shall be laundered regularly. After contact with the product, all parts of the body that have been soiled must be washed.

This mixture is stable under the recommended handling and storage conditions in section 7.

No data available.

No data available.

formation of dusts, frost

carbon monoxide (CO), carbon dioxide (CO2)