NextSDS Logo
Safety Data Sheet EN

Lyreco Pro Toilet descaler

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Lyreco Pro Toilet descaler

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Limescale-Remover (AISE_SUMI_PW_13_2)

Manufacturers & Suppliers

Lyreco logo

Lyreco

distributor

Rue du 19 Mars 1962, 59770 Marly, France

+33327236400

http://www.lyreco.com/

Emergency Contacts

Emergency Contact

+32 70 245 245

Emergency Contact

+31 30 274 88 88

Emergency Contact

+ 33 (0)1 45 42 59 59

Emergency Contact

(+352) 8002-5500

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

EUH210

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Citric Acid EC: 201-069-1 77-92-9 6% Yes
Isopropanol EC: 200-661-7 67-63-0 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

In case of serious or continuous discomforts: remove to fresh air and seek medical attention.

Skin contact

Rinse with water.

Eye contact

Rinse first with plenty of water, if necessary seek medical attention.

Symptoms: Redness

Ingestion

Rinse first with plenty of water, if necessary seek medical attention.

Symptoms: Diarrhoea, headache, abdominal cramps, sleepiness, vomiting

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, foam, powder, sprayed water

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not walk into or touch spilled substances and avoid inhalation of fumes, smoke, dusts and vapours by staying up wind. Remove any contaminated clothing and used contaminated protective equipment and dispose of it safely.

Environmental

Do not allow to flow into sewers or open water.

Cleanup methods

If possible, remove by using absorbent material.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle with care to avoid spillage.

Storage

Keep in a sealed container in a closed, frost-free, ventilated room.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

If necessary, use with sufficient exhaust ventilation.

Hands

Handling with nitril-gloves (EN 374). Breakthrough time: >480' Material thickness: 0.35 mm. Thoroughly check gloves before use. Take of the gloves properly without touching the outside with your bare hands. The manufacturer of the protective gloves has to be consulted about the suitability for a specific work station.

Eyes

Tight-fitting safety goggles. Wear a face shield and protective suit in case of exceptional processing problems.

Respiratory

Respiratory protection is not required. Use ABEK type gas masks in case of irritating exposure.

Skin/Body

Wear impermeable clothing. The type of protective equipment depends on the concentration and amount of hazardous substances at the work station in question.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Voc Content
1.00 %
Ph
2.9
Solubility In Water
Completely soluble
Colour Intensity
---
Evaporation Rate
1.300
Vapor Density
Not applicable
Solidification Point
---
Auto Ignition Temperature
---
Form
---
Relative Density
1.0270 kg/l
Vapor Pressure
---
Properties Status
---
Boiling Point
82 °C — 100 °C
Molecular Weight
---
Metal Corrosion
---
Decomposition Temperature
---
Lower Explosive Limit
---
Kinematic Viscosity
234 mm²/s
Density
---
Bulk Density
---
Flammability
Not applicable
Softening Point
---
Relative Evaporation Rate
---
Dynamic Viscosity
240 mPa.s
Odor Threshold
Not applicable
Physical State Data
liquid
State Under Standard Conditions
---
Crystallisation Point
---
Solubility
---
Solubility In Fat
---
Upper Explosive Limit
---
Melting Point
---
Partition Coefficient
Not applicable
Freezing Point
---
Appearance
Liquid
Odor
characteristic
Physical State
Liquid
Explosive Limits
---
Flash Point
---
Cloud Point
---
Colour
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Reactivity

Stable under normal conditions.

Avoid

Extremely high or low temperatures.

Incompatible

Acids, alkalines, oxidants, reductants

Decomposition

Under recommended usage conditions, hazardous decomposition products are not expected.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Lyreco Pro Toilet descaler?

The signal word is no signal word.

What is the physical form of Lyreco Pro Toilet descaler?

Lyreco Pro Toilet descaler is a liquid appearing as liquid . It has characteristic odor.

What is Lyreco Pro Toilet descaler used for?

Limescale-Remover (AISE_SUMI_PW_13_2)