NextSDS Logo
Safety Data Sheet EN

TORK PREMIUM SOAP LIQUID HAIR & BODY S1

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TORK PREMIUM SOAP LIQUID HAIR & BODY S1
Product Code
420601

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Skin cleanser.

Manufacturers & Suppliers

A

ASALEO CARE

manufacturer

30 - 32 Westall Road Springvale Vic 3171 AUSTRALIA

+61 3 9550 2999

Emergency Contacts

ASALEO CARE

+61 3 9550 2999

BH

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2A

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H319 Causes serious eye irritation.

Precautionary Statements

P264 Wash contaminated skin thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium laureth sulfate 68891-38-3 5 - 10% No
Cocamidopropyl betaine 61789-40-0 1 - 5% No
Glycerin 56-81-5 1% No
Other ingredients determined not to be hazardous, including water. --- --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove affected person from contaminated area. Keep at rest until recovered.

Skin contact

Wash affected area thoroughly with soap and water.

Eye contact

Hold eyelids apart and flush the eyes continuously with running water. Remove contact lenses. Continue flushing for several minutes until all contaminants are washed out completely.

Ingestion

Do not induce vomiting. Wash out mouth thoroughly with water.

Immediate Medical Attention

Seek immediate medical attention.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use appropriate fire extinguisher for surrounding environment.

Specific hazards

This product is non combustible. However, following evaporation of aqueous component under fire conditions, the non-aqueous component may decompose and/or burn.

Instructions

Fight fire from safe location.

Firefighter Protection

Fire fighters should wear full protective clothing and self-contained breathing apparatus (SCBA) operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear appropriate personal protective equipment and clothing to prevent exposure. Increase ventilation. If possible contain the spill. Place inert absorbent material onto spillage. Collect the material and place into a suitable labelled container. Do not dilute material but contain.

Cleanup methods

Collect the material and place into a suitable labelled container.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid inhalation of vapours and mists, and skin or eye contact. Use only in a well ventilated area. Keep containers sealed when not in use. Prevent the build up of mists or vapours in the work atmosphere.

Storage

Store in a cool, dry, well-ventilated area, out of direct sunlight. Store in suitable, labelled containers. Keep containers tightly closed. Store away from incompatible materials.

Hygiene

Maintain high standards of personal hygiene i.e. Washing hands prior to eating, drinking, smoking or using toilet facilities.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Blue, viscous liquid.
Colour
Blue
Colour Intensity
---
Form
Liquid
Odor
Pleasant fragrant odour.
Odor Threshold
---
Ph
5.05 (10% aqueous solution)
Melting Point
0°C (approx.)
Boiling Point
100°C (approx.)
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
1.03 g/cm³
Flammability
Non-flammable substance.
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
Soluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
3750 cP
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of use and storage.

Reactivity

Reacts with incompatible materials

Hazardous reactions

Will not occur.

Avoid

Extremes of temperature and direct sunlight.

Incompatible

Strong oxidising agents.

Decomposition

Thermal decomposition may result in the release of toxic and/or irritating fumes, smoke and gases including: carbon monoxide, carbon dioxide, oxides of nitrogen and oxides of sulphur.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TORK PREMIUM SOAP LIQUID HAIR & BODY S1?

The signal word is warning.

What is the physical form of TORK PREMIUM SOAP LIQUID HAIR & BODY S1?

TORK PREMIUM SOAP LIQUID HAIR & BODY S1 is a liquid appearing as blue, viscous liquid. with blue color. It has pleasant fragrant odour. odor.

What is TORK PREMIUM SOAP LIQUID HAIR & BODY S1 used for?

Skin cleanser.

What are the hazard statements for TORK PREMIUM SOAP LIQUID HAIR & BODY S1?

This substance has 1 hazard statement:

  • H319: Causes serious eye irritation.

What is the melting point of TORK PREMIUM SOAP LIQUID HAIR & BODY S1?

The melting point is 0°C (approx.) and the boiling point is 100°C (approx.).