Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- HYDRANAL™ Water Standard 10.0
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals
Manufacturers & Suppliers
Honeywell International, Inc.
manufacturer
115 Tabor Road, Morris Plains, NJ 07950-2546, USA
Emergency Contacts
ChemTrec-Transport
+1-703-527-3887
Medical
+1-303-389-1414
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Keep patient warm and at rest. Call a physician immediately.
Symptoms: Drowsiness, Headache
Wash off with soap and water. If skin irritation persists, call a physician.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Protect unharmed eye.
When swallowed, allow water to be drunk. Do NOT induce vomiting. Call a physician immediately.
Immediate Medical Attention
Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Foam, Carbon dioxide (CO2), Dry powder
High volume water jet
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Wear personal protective equipment. Unprotected persons must be kept away. Remove all sources of ignition. Ensure adequate ventilation.
Should not be released into the environment.
Pick for disposal in tightly closed containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Exhaust ventilation at the object is necessary.
Store in original container. Keep containers tightly closed in a dry, cool and well-ventilated place.
Take off all contaminated clothing immediately. Remove and wash contaminated clothing before re-use. Wash hands before breaks and at the end of workday. When using do not eat or drink.
Keep away from sources of ignition - No smoking. Take measures to prevent the build up of electrostatic charge. Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use with local exhaust ventilation.
Glove material: Viton (R); Break through time: > 480 min; Glove thickness: 0,7 mm; Vitoject® 890. Gloves must be inspected prior to use. Replace when worn. The specifications are based on information and tests from similar substances by analogy. Due to varying conditions ( e.g.temperature or other strains) it must be considered that the usage of a chemical protective glove in practice may be much shorter than the permeation time determined in accordance with EN 374. Since actual conditions of practical use often deviate from standardised conditions according EN 374 the glove manufacturer recommends to use the chemical protective glove in practice not longer than 50% of the recommended permeation time. Manufacturer's directions for use should be observed because of great diversity of types. Suitable gloves tested according EN 374 are supplied e.g. from KCL GmbH, D-36124 Eichenzell, Vertrieb@kcl.de
Safety goggles; safety glasses EN 166
In case of insufficient ventilation wear suitable respiratory equipment; respirator EN 136, 140, 149
Protective suit; protective suit: EN 340, 463, 468, 943-1, 943-2
Handle in accordance with local environmental regulations and good industrial practices.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used as directed.
Stable under recommended storage conditions.
Vapours may form explosive mixture with air. Hazardous polymerisation does not occur.
Heat, flames and sparks.
Strong oxidizing agents
no data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- FLAMMABLE LIQUID, N.O.S. (1-BUTANOL, XYLENE)
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for HYDRANAL™ Water Standard 10.0?
The signal word is danger.
What is the physical form of HYDRANAL™ Water Standard 10.0?
HYDRANAL™ Water Standard 10.0 is a liquid with colourless color. It has aromatic odor.
What is HYDRANAL™ Water Standard 10.0 used for?
Laboratory chemicals
What are the hazard statements for HYDRANAL™ Water Standard 10.0?
This substance has 6 hazard statements:
- H226: Flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H335: May cause respiratory irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of HYDRANAL™ Water Standard 10.0?
The melting point is no data available and the boiling point is 109 °C at 1.013 hPa.