NextSDS Logo
Safety Data Sheet EN

Sakura Fragrance Sticks

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Sakura Fragrance Sticks
Product Code
1 506 000

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Air freshener

Uses advised against

All uses not specified in this section or in section 7.3

Manufacturers & Suppliers

CTR – Consultoria, Técnica e Representações, Lda. logo

CTR – Consultoria, Técnica e Representações, Lda.

distributor

Loteamento Industrial da Murteira, 23-24, 2135-301 Samora Correia, Santarém, Portugal

+351 263 650 760

http://www.ctr.pt

Emergency Contacts

Emergency Contact

+44 (0)203 394 9880

24 h

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H225 Highly flammable liquid and vapour

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand
P102 Keep out of reach of children
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P370 + P378 In case of fire: Use ABC powder extinguisher to extinguish.
P403 + P235 Store in a well-ventilated place. Keep cool
P501 Dispose of the contents/containers in accordance with the current legislation on waste treatment

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Benzyl acetate EC: 205-399-7 140-11-4 1 - 2.5% Yes
Linalool EC: 201-134-4 78-70-6 1% Yes
3,4,5,6,6-pentamethylhept-3-en-2-one EC: 289-194-8 86115-11-9 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove the person affected from the exposure area and provide with fresh air. Seek medical attention if the symptoms get worse or persist.

Skin contact

Remove contaminated clothes and shoes, rinse the skin or if necessary shower the affected person thoroughly with cold water and neutral soap. In case of serious reaction consult a doctor.

Eye contact

Rinse eyes thoroughly with water for at least 15 minutes. If the injured person uses contact lenses, these should be removed unless they are stuck to the eyes, in which case removal could cause further damage. In all cases, after cleaning, a doctor should be consulted as quickly as possible with the SDS for the product.

Ingestion

Do not induce vomiting, but if it does happen keep the head down to avoid aspiration. Keep the person affected at rest. Rinse out the mouth and throat, as they may have been affected during ingestion.

Immediate Medical Attention

Seek medical attention if the symptoms get worse or persist (inhalation). In case of serious reaction consult a doctor (skin). In all cases, after cleaning, a doctor should be consulted as quickly as possible (eye).

Medical Treatment

Non-applicable

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

polyvalent powder fire extinguishers (ABC powder), alternatively use foam or carbon dioxide extinguishers (CO₂)

Unsuitable media

tap water

Specific hazards

As a result of combustion or thermal decomposition reactive sub-products are created that can become highly toxic and, consequently, can present a serious health risk.

Instructions

Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an accident or other emergencies. Eliminate all sources of ignition. In case of fire, cool the storage containers and tanks for products susceptible to combustion, explosion or BLEVE as a result of high temperatures.

Firefighter Protection

Depending on the magnitude of the fire it may be necessary to use full protective clothing and self-contained breathing apparatus (SCBA).

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate leaks provided that there is no additional risk for the people performing this task. Evacuate the area and keep out those without protection.

Environmental

This product is not classified as hazardous to the environment. Keep product away from drains, surface and underground water.

Cleanup methods

Absorb the spillage using sand or inert absorbent and move it to a safe place.

Materials: sand or inert absorbent

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep containers hermetically sealed. Control spills and residues, destroying them with safe methods (section 6). Avoid leakages from the container. Maintain order and cleanliness where dangerous products are used.

Storage

Avoid sources of heat, radiation, static electricity and contact with food.

Hygiene

Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.

Fire prevention

Fully control sources of ignition (mobile phones, sparks,...) and ventilate during cleaning operations.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Non-applicable

Eyes

Non-applicable

Respiratory

The use of protection equipment will be necessary if a mist forms or if the occupational exposure limits are exceeded.

Skin/Body

Non-applicable

Environmental

In accordance with the community legislation for the protection of the environment it is recommended to avoid environmental spillage of both the product and its container. For additional information see sub section 7.1.D

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Not available
Colour
Not available
Colour Intensity
---
Form
---
Odor
Not available
Odor Threshold
Non-applicable *
Ph
Non-applicable *
Melting Point
Non-applicable *
Boiling Point
85 °C
Flash Point
21 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Non-applicable *
Vapor Pressure
4565 Pa (at 20 °C)
Vapor Density
---
Relative Density
0,867 - 0,877
Bulk Density
---
Density
850 kg/m³
Flammability
---
Upper Explosive Limit
Non-applicable *
Lower Explosive Limit
Non-applicable *
Explosive Limits
---
Auto Ignition Temperature
235 °C
Decomposition Temperature
Non-applicable *
Solubility
---
Partition Coefficient
Non-applicable *
Solubility In Water
Non-applicable *
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Non-applicable *
Kinematic Viscosity
Non-applicable *
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Chemically stable under the conditions of storage, handling and use.

Reactivity

No hazardous reactions are expected because the product is stable under recommended storage conditions. See section 7.

Hazardous reactions

Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected.

Avoid

Increase in temperature: Risk of combustion; Sunlight: Avoid direct impact

Incompatible

Acids: Avoid strong acids; Combustive materials: Avoid direct impact; Others: Avoid alkalis or strong bases

Decomposition

Depending on the decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO2), carbon monoxide and other organic compounds.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1170
Shipping Name
ETHANOL SOLUTION (ETHYL ALCOHOL SOLUTION)
Transport Class
3
Packing Group
II
ADR

Special regulations: 144, 601; Tunnel restriction code: D/E; Physico-Chemical properties: see section 9; Limited quantities: 1 L

IMDG

Special regulations: 144; EmS Codes: F-E, S-D; Physico-Chemical properties: see section 9; Limited quantities: 1 L

IATA

Physico-Chemical properties: see section 9

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Sakura Fragrance Sticks?

The signal word is danger.

What is the physical form of Sakura Fragrance Sticks?

Sakura Fragrance Sticks is a liquid appearing as not available with not available color. It has not available odor.

What is Sakura Fragrance Sticks used for?

Air freshener

What are the hazard statements for Sakura Fragrance Sticks?

This substance has 1 hazard statement:

  • H225: Highly flammable liquid and vapour

What is the melting point of Sakura Fragrance Sticks?

The melting point is Non-applicable * and the boiling point is 85 °C.