NextSDS Logo
Safety Data Sheet EN

DUNLOP AUTOSHAMPOO WASH&WAX

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
DUNLOP AUTOSHAMPOO WASH&WAX

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Shampoo for car-body.

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

E

EDCO

distributor

Adriaan Mulderweg 9-11, 5657 EM Eindhoven, Netherlands

+31-402501111

Emergency Contacts

Emergency Contact

112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H319 Causes serious eye irritation.

Precautionary Statements

P102 Keep out of reach of children.
P280 Wear eye protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P501 Dispose of contents/container in accordance with local regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Alcohols, C12-14, ethoxylated, sulfates, sodium salts EC: 500-234-8 68891-38-3 3% Yes
Benzenesulfonic acid EC: 287-494-3 85536-14-7 0.8% Yes
Sodium hydroxide EC: 215-185-5 1310-73-2 0.16% Yes
Bronopol EC: 200-143-0 52-51-7 0.01% Yes
Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) 55965-84-9 0.0011% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move the exposed person to fresh air at once. Provide fresh air, warmth and rest, preferably in a comfortable upright sitting position. Get medical attention if any discomfort continues.

Symptoms: high concentration of vapors or mists may cause irritation of the mucous membranes of the eyes and respiratory tract, tearing, redness, conjunctivitis, coughing, burning sensation in throat and nose

Skin contact

Immediately remove contaminated clothing. Wash the skin with soap and water. Contaminated clothing should be washed before re-use. Consult a doctor, if disturbing symptoms occur.

Symptoms: possible redness, burning sensation, dryness, degreasing.

Eye contact

Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes and get medical attention if symptoms occur after washing.

Symptoms: tearing, redness, pain, irritation.

Ingestion

Immediately rinse mouth. Do not induce vomiting. Never give anything by mouth to an unconscious person. Seek medical advice. Provide ventilation.

Symptoms: possible abdominal pains, vomiting, nausea, diarrhoea.

Immediate Medical Attention

If any symptoms persist seek medical advice and show the msds or label.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

foam, carbon dioxide, dry powder, water spray.

Unsuitable media

do not use water in a jet.

Specific hazards

During combustion toxic gases consisting of e.g. carbon oxides and other unidentified products of thermal decomposition. Do not inhale combustion products, it may cause health risk.

Instructions

Keep containers cool by spraying with water. If possible, remove containers from the danger zone.

Firefighter Protection

Wear full protective clothing and self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Removed from the danger area all persons not involved in the emergency. If necessary, order the evacuation. Avoid contact with skin, eyes. Avoid inhalation of vapours. Provide ventilation.

Environmental

Do not discharge into drains, water courses or into the ground.

Cleanup methods

Collect product using liquid binding materials and rinse residues with water.

Materials: liquid binding materials (eg. sand, earth, silica, universal binding substances, Vermiculite etc.)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only in a well-ventilated area. Avoid breathing vapor. Avoid contact with eyes, skin. When handling, use appropriate personal protective equipment (see Section 8). Keep away from heat. Do not smoke! When using do not eat or drink.

Storage

Store only in original, tightly sealed containers, in a dry, cool and well ventilated place. Keep away from food, foodstuffs, animal feed. Containers that are opened should be properly resealed and kept upright to prevent leakage.

Hygiene

When using do not eat, drink or smoke. Wash hand before and after work with product. Contaminated clothing should be washed before re-use.

Fire prevention

Keep away from heat. Do not smoke!

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Use gloves. Gloves must be inspected prior to use. The selected protective gloves have to satisfy the specifications of Directive 89/686 / EEC and EN 374. The material that the gloves are made of must be impenetrable and resistant to the product's effects. The selection of material must be performed with consideration of breakthrough time, penetration speed and degradation. Moreover, the selection of proper gloves depends not only on the material, but also on other quality features and changes depending on the manufacturer. The producer should provide detailed information regarding the exact breakthrough time. This information should be followed.

Eyes

Avoid contact with eyes. Wear approved chemical safety goggles where eye exposure is reasonably probable. Use equipment for eye protection tested and approved under appropriate government standards such as EN 166.

Respiratory

Where risk assessment shows air-purifying respirators are appropriate use a face respirator. It is recommended to use respiratory equipment with filter.

Skin/Body

Wear protective clothing. Contaminated clothing should be washed before re-use.

Environmental

Local guidelines on emission limits for volatile substances must be observed for the discharge of exhaust air containing vapour. Do not discharge into drains, water courses or into the ground. Local authorities should be advised if any exposure to the environment occurs.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Fat
---
Flash Point
No data available
Relative Density
---
Flammability
No data available
Physical State Data
liquid
Ph
6-8
Softening Point
---
Evaporation Rate
---
Melting Point
No data available
Solubility In Water
---
Kinematic Viscosity
No data available
Voc Content
---
Freezing Point
---
Odor
Odourless
Bulk Density
---
Cloud Point
---
Metal Corrosion
---
Dynamic Viscosity
---
Relative Evaporation Rate
---
Colour Intensity
---
State Under Standard Conditions
---
Upper Explosive Limit
No data available
Appearance
---
Vapor Pressure
No data available
Explosive Limits
---
Solubility
Soluble in water
Auto Ignition Temperature
No data available
Solidification Point
---
Vapor Density
---
Properties Status
---
Density
1,020-1,028 g/cm³
Decomposition Temperature
No data available
Colour
Blue
Lower Explosive Limit
No data available
Odor Threshold
---
Crystallisation Point
---
Partition Coefficient
No data available
Boiling Point
No data available
Form
---
Molecular Weight
---
Physical State
Liquid
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Product is slightly reactive.

Hazardous reactions

Product does not undergo a dangerous polymerization.

Avoid

Protect from freezing and direct sunlight.

Incompatible

Strong oxidizers, strong acids, bases and chlorine compounds.

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for DUNLOP AUTOSHAMPOO WASH&WAX?

The signal word is warning.

What is the physical form of DUNLOP AUTOSHAMPOO WASH&WAX?

DUNLOP AUTOSHAMPOO WASH&WAX is a liquid with blue color. It has odourless odor.

What is the solubility of DUNLOP AUTOSHAMPOO WASH&WAX?

Soluble in water

What is DUNLOP AUTOSHAMPOO WASH&WAX used for?

Shampoo for car-body.

What are the hazard statements for DUNLOP AUTOSHAMPOO WASH&WAX?

This substance has 1 hazard statement:

  • H319: Causes serious eye irritation.

What is the melting point of DUNLOP AUTOSHAMPOO WASH&WAX?

The melting point is No data available and the boiling point is No data available.