Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Dibenzylamine
- Product Code
- 112610000; 112610050; 112612500; 112610010
- Chemical Name
- Dibenzylamine
- Synonyms
- N-(Phenylmethyl)benzenemethanamine
Regulatory Identifiers
- CAS Number
- 103-49-1 Check regulations →
- EC Number
- 203-117-7 Check regulations →
Identified Uses
Laboratory chemicals.
Uses advised against
No Information available
Manufacturers & Suppliers
Fisher Scientific UK
distributor
Bishop Meadow Road, Loughborough, Leicestershire LE11 5RG, United Kingdom
Thermo Fisher Scientific
distributor
Janssen Pharmaceuticalaan 3a, 2440 Geel, Belgium
Emergency Contacts
Emergency Contact
001-800-227-6701
Emergency Contact
+32 14 57 52 11
Emergency Contact
001-201-796-7100
Emergency Contact
+32 14 57 52 99
CHEMTREC
001-800-424-9300
CHEMTREC
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Benzenemethanamine, N-(phenylmethyl)- EC: 203-117-7 | 103-49-1 | 95% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure, lie down. Remove to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration.
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Clean mouth with water.
Symptoms: Ingestion causes severe swelling, severe damage to the delicate tissue and danger of perforation
Immediate Medical Attention
Get medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Carbon dioxide (CO₂). Dry chemical. Chemical foam.
No information available.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not flush into surface water or sanitary sewer system. Do not allow material to contaminate ground water system. Prevent product from entering drains. Avoid release to the environment. Collect spillage.
Soak up with inert absorbent material
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Do not breathe mist/vapors/spray. Do not ingest. If swallowed then seek immediate medical assistance.
Keep in a dry, cool and well-ventilated place. Keep container tightly closed.
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Wash hands before breaks and after work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Ensure that eyewash stations and safety showers are close to the workstation location. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source
Protective gloves. Glove material: Nitrile rubber, Neoprene, Natural rubber PVC. Breakthrough time: See manufacturers recommendations. EU standard: EN 374. Glove comments: (minimum requirement).
Goggles (European standard - EN 166)
No protective equipment is needed under normal use conditions. Large scale/emergency use Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Small scale/Laboratory use Maintain adequate ventilation
Wear appropriate protective gloves and clothing to prevent skin exposure.
Prevent product from entering drains. Do not allow material to contaminate ground water system. Local authorities should be advised if significant spillages cannot be contained.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
None known, based on information available
Hazardous polymerization does not occur. No information available.
Incompatible products.
Acids. Strong oxidizing agents. Acid anhydrides. Acid chlorides. Chloroformates.
Nitrogen oxides (NOx). Carbon monoxide (CO). Carbon dioxide (CO₂).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2735
- Shipping Name
- AMINES, LIQUID, CORROSIVE, N.O.S.
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Dibenzylamine known by?
Dibenzylamine is also known as: N-(Phenylmethyl)benzenemethanamine
What is the hazard signal word for Dibenzylamine?
The signal word is danger.
What is the physical form of Dibenzylamine?
Dibenzylamine is a liquid appearing as clear . It has ammonia-like odor.
What is Dibenzylamine used for?
Laboratory chemicals.
What are the hazard statements for Dibenzylamine?
This substance has 3 hazard statements:
- H302: Harmful if swallowed
- H314: Causes severe skin burns and eye damage
- H410: Very toxic to aquatic life with long lasting effects
What is the melting point of Dibenzylamine?
The melting point is -26 °C / -14.8 °F and the boiling point is 300 °C / 572 °F @ 760 mmHg.