Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ALUMINIUM WHEEL CLEANER - 500 ML
- Product Code
- 0890 102
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Detergent for wheels
Manufacturers & Suppliers
A. Wuerth GmbH & Co. KG
manufacturer
Reinhold-Würth-Str. 12-17, D-74653 Künzelsau
++49 (0)7940/15-0
Emergency Contacts
Advisory office in case of poisoning
+49 30 / 19240
A. Wuerth GmbH & Co. KG
++49 (0)7940/15-2552
7.00h - 18.00h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Propan-2-ol EC: 200-661-7 | --- | 1 - 15% | Yes |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | --- | 1 - 10% | Yes |
| Ethoxylated fatty alcohol | --- | 1 - 5% | Yes |
| Citric acid EC: 201-069-1 | --- | 1 - 5% | Yes |
Notes
For complete wording of the R-phrases, refer to point 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person from danger area. Supply person with fresh air.
Wash thoroughly using copious water - remove contaminated clothing immediately.
Symptoms: redness
Wash thoroughly for several minutes using copious water
Rinse the mouth thoroughly with water. Do not induce vomiting - give copious water to drink.
Immediate Medical Attention
Consult doctor according to symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, Alcohol resistant foam, Dry extinguisher, Water jet spray
n.c.
In case of fire the following can develop: Oxides of carbon, Toxic pyrolysis products, Flammable vapour/air mixtures.
Firefighter Protection
Protective respirator with independent air supply. According to size of fire. Full protection, if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure sufficient supply of air. Remove possible causes of ignition - do not smoke. Avoid inhalation, and contact with eyes or skin. If applicable, caution - risk of slipping.
Prevent surface and ground-water infiltration, as well as ground penetration.
Collect using absorbant material. Diluting with water is possible. Flush residue using copious water.
Materials: Universal binding medium, sand, kieselguhr
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
See point 6.1. Avoid contact with eyes or skin. Observe directions on label and instructions for use. Use working methods according to operating instructions.
Store products only unopened, in original packing. Not to be stored in gangways or stair wells. Protect from direct sunlight and warming.
Eating, drinking, smoking, as well as food-storage, is prohibited in work-room. Wash hands before breaks and at end of work.
Do not heat to temperatures close to flash point.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant protective gloves (EN 374). Recommended Protective nitrile gloves (EN 374) Minimum layer thickness in mm: 0,4 Permeation time (penetration time) in minutes: > 480 (Level 6) Protective hand cream recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable when handled and stored correctly.
Contact with strong alkalis leads to strong exothermic reaction.
See point 7, Strong heat
strong alkalis, acid sensitive materials
See point 5.3. No decomposition when used as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- FLAMMABLE LIQUID, N.O.S. (ISOPROPYL ALCOHOL, 2-METHOXY-1-METHYLETHYL ACETATE)
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ALUMINIUM WHEEL CLEANER - 500 ML?
The signal word is warning.
What is the physical form of ALUMINIUM WHEEL CLEANER - 500 ML?
ALUMINIUM WHEEL CLEANER - 500 ML is a liquid with colourless, clear color. It has ester, alcoholic odor.
What is ALUMINIUM WHEEL CLEANER - 500 ML used for?
Detergent for wheels
What are the hazard statements for ALUMINIUM WHEEL CLEANER - 500 ML?
This substance has 3 hazard statements:
- EUH066: Repeated exposure may cause skin dryness or cracking.
- H319: Irritation of the eyes
- H412: Low pH-value can be harmful to water.
What is the melting point of ALUMINIUM WHEEL CLEANER - 500 ML?
The melting point is n.av. and the boiling point is n.av..