Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Benzyl mercaptan for synthesis
- Product Code
- 802226
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Chemical for synthesis
Manufacturers & Suppliers
EMD Millipore Corporation
manufacturer
290 Concord Road, Billerica, MA 01821, United States of America
+1-978-715-4321
Emergency Contacts
CHEMTREC
800-424-9300
24 Hours/day; 7 Days/week
CHEMTREC
+1-703-527-3887
24 Hours/day; 7 Days/week
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Formula: C₆H₅CH₂SH; C₇H₈S (Hill). Molar mass: 124.2 g/mol
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| benzyl mercaptan | 100-53-8 | 90 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air.
After skin contact: wash off with plenty of water. Remove contaminated clothing.
After eye contact: rinse out with plenty of water.
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician. Never give anything by mouth to an unconscious person.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, Carbon dioxide (CO2), Foam, Dry powder
For this substance/mixture no limitations of extinguishing agents are given.
Combustible material. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air at elevated temperatures.
Suppress (knock down) gases/vapors/mists with a water spray jet.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid substance contact. Do not breathe vapors, aerosols. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not empty into drains.
Take up with liquid-absorbent material (e.g. Chemizorb®). Dispose of properly. Clean up affected area.
Materials: liquid-absorbent material (e.g. Chemizorb®)
Related Products
Similar products with comparable safety profiles
Nitrobenzene for synthesis
CAS: 98-95-3
Benzaldehyde for synthesis
CAS: 100-52-7
2-Mercaptoethanol for synthesis
CAS: 60-24-2
2-Mercaptoethanol for synthesis
CAS: 60-24-2
Butylamine for synthesis
CAS: 109-73-9
Benzotrifluoride for synthesis
CAS: 98-08-8
1,4-Diethylbenzene for synthesis
---
Benzyl acetate
CAS: 140-11-4
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe label precautions.
Tightly closed. Store at +15°C to +25°C (+59°F to +77°F).
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.
Safety glasses
required when vapors/aerosols are generated. Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.
protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Sensitive to air.
Vapor/air-mixtures are explosive at intense warming.
Violent reactions possible with: Strong oxidizing agents, Strong acids
Heating. A range from approx. 15 Kelvin below the flash point is to be rated as critical.
no information available
in the event of fire: See section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. ( BENZYL MERCAPTAN)
- Transport Class
- 9
- Packing Group
- III
yes
no
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Benzyl mercaptan for synthesis?
The signal word is warning.
What is the physical form of Benzyl mercaptan for synthesis?
Benzyl mercaptan for synthesis is a liquid with colorless color. It has stinging odor.
What is Benzyl mercaptan for synthesis used for?
Chemical for synthesis
What are the hazard statements for Benzyl mercaptan for synthesis?
This substance has 2 hazard statements:
- H302: Harmful if swallowed.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Benzyl mercaptan for synthesis?
The melting point is -29.2 °C and the boiling point is 379 - 383 °F ( 193 - 195 °C) at 1,013 hPa.