NextSDS Logo
Safety Data Sheet EN

Z-Dab-OH

CAS 62234-40-6

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Z-Dab-OH
Product Code
4015635

Regulatory Identifiers

CAS Number
62234-40-6 Check regulations →

Identified Uses

Laboratory chemicals

Manufacturers & Suppliers

B

Bachem AG

manufacturer

Hauptstrasse 144, CH-4416 Bubendorf, Switzerland

+41 58 595 2021

Emergency Contacts

Tox Info Suisse

+41 44 251 51 51

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Z-Dab-OH 62234-40-6 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water.

Ingestion

Call a doctor immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Specific hazards

No further relevant information available.

Firefighter Protection

No special measures required.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Not required.

Environmental

No special measures required.

Cleanup methods

Pick up mechanically.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Prevent formation of dust.

Storage

Store in dry conditions.

Fire prevention

No special measures required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Protective gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eyes

Safety glasses

Respiratory

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Use suitable respiratory protective device in case of insufficient ventilation.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flammability
Not applicable.
Vapor Pressure
Not determined.
Odor Threshold
Not determined.
Relative Evaporation Rate
---
Physical State Data
solid
Colour
Whitish
Explosive Limits
---
Lower Explosive Limit
Not determined.
Metal Corrosion
---
Melting Point
185 °C
Colour Intensity
---
Molecular Weight
252,2700 g/mol
Softening Point
---
Bulk Density
---
Flash Point
Not applicable.
Appearance
Powder
Freezing Point
---
Properties Status
---
Relative Density
---
Solubility In Fat
---
Solidification Point
---
Vapor Density
---
Upper Explosive Limit
Not determined.
Cloud Point
---
Crystallisation Point
---
Evaporation Rate
---
Auto Ignition Temperature
---
Physical State
Powder
Density
Not determined.
Dynamic Viscosity
Not determined.
Voc Content
---
Ph
---
Partition Coefficient
---
Kinematic Viscosity
Not determined.
State Under Standard Conditions
---
Decomposition Temperature
Not determined.
Solubility
---
Boiling Point
Undetermined.
Solubility In Water
Not determined.
Odor
Nearly odourless
Form
Powder
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used according to specifications.

Hazardous reactions

No dangerous reactions known.

Avoid

No further relevant information available.

Incompatible

No further relevant information available.

Decomposition

No dangerous decomposition products known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Z-Dab-OH?

The signal word is no signal word.

What is the physical form of Z-Dab-OH?

Z-Dab-OH is a powder appearing as powder with whitish color. It has nearly odourless odor.

What is Z-Dab-OH used for?

Laboratory chemicals

What is the melting point of Z-Dab-OH?

The melting point is 185 °C and the boiling point is Undetermined..