Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MTFOAM
- Product Code
- G100001
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning of carpets, textiles, glass, upholstery, vinyl, leather, cars, aluminium or PVC, both indoors and outdoors.
Uses advised against
No additional information available.
Manufacturers & Suppliers
MULTITASK INDUSTRIES
manufacturer
KARNEMELKSTRAAT 12, 9060 ZELZATE / BELGIUM
+32 (0)9 282 43 61
http://www.multitaskindustries.be
Emergency Contacts
Poison control centre (Brussels)
+32 (0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-methoxy-2-propanol; monopropylene glycol methyl ether EC: 203-539-1 | 107-98-2 | 5 - 10% | Yes |
| Propan-2-ol; isopropyl alcohol; isopropanol EC: 200-661-7 | 67-63-0 | 5 - 10% | Yes |
| Hydrocarbons, C3-4-rich, petroleum distillate Petroleumgas (1,3-butadiene < 0.1%) EC: 270-990-9 | 68512-91-4 | 5 - 10% | Yes |
| Hydrocarbons, C11-C14, n-alkanes, isoalkanes, cyclics, < 2% aromatics EC: 926-141-6 | --- | 5 - 10% | Yes |
| Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides EC: 931-292-6 | 308062-28-4 | 1% | Yes |
| Ammonium carbonate EC: 233-786-0 | 10361-29-2 | 1% | Yes |
| Sulfonic acids, C14-17-sec-alkane, sodium salts EC: 307-055-2 | 97489-15-1 | 1% | Yes |
| Benzoic acid EC: 200-618-2 | 65-85-0 | 0.1% | Yes |
| Sodium salt of an alkyl ether sulfate2 EC: 500-234-8 | --- | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Symptoms: No adverse health effects expected.
Wash with plenty of soap and water.
Symptoms: May cause irritation.
If substance has got into eyes, immediately wash out with plenty of water.
Symptoms: May cause irritation.
If swallowed accidentally, do not induce vomiting and seek medical advice.
Symptoms: May cause gastrointestinal disturbances. Symptoms: Sore throat, abdominal pain, nausea, vomiting.
Immediate Medical Attention
In case of accident or if you feel unwell, seek medical advice (show the label where possible). If symptoms persist always call a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, foam, carbon dioxide or dry agent.
Aerosol may explode if heated above 50°C.
Keep container(s) exposed to fire cool, by spraying with water.
Firefighter Protection
In case of fire, do not breathe fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Shut off all ignition sources. Ensure adequate ventilation.
Do not allow to enter public sewers and watercourses.
Wash spill site with water and detergent.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and sources of ignition. Do not spray on a naked flame or incandescent material. Do not pierce or burn aerosols, even after use. Do not breathe aerosols or vapors. Ensure adequate ventilation. Avoid contact with skin and eyes.
Pressurised container: Protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. Store in a well-ventilated place. Store frost free. Keep out of reach of children.
Avoid contact with skin and eyes.
Keep away from heat and sources of ignition. Do not spray on a naked flame or incandescent material. Do not pierce or burn aerosols, even after use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. Keep away from heat and sources of ignition.
For incidental contact with the product wear chemical-resistant gloves (standard EN 374). The use of disposable gloves is acceptable provided that they are changed immediately after a splash or spill. Recommended gloves: Nitrile.
Wear safety eyewear according to EN 166.
In case of insufficient ventilation, wear suitable respiratory equipment. Recommended respiratory protection: Air purifying respirator equipped with organic gas/vapor cartridge (type A).
For incidental contact with the product wear chemical-resistant gloves (standard EN 374). The use of disposable gloves is acceptable provided that they are changed immediately after a splash or spill.
Avoid release to the environment. Collect spillage.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
No hazardous reactions known if used for its intended purpose.
No hazardous reactions known if used for its intended purpose.
Pressurised container: Protect from sunlight and do not expose to temperatures exceeding 50°C. Avoid overheating. Store frost free.
Strong oxidizing agent.
CO, CO2.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.2
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MTFOAM?
The signal word is warning.
What is the physical form of MTFOAM?
MTFOAM is a propane/butane propelled liquid. with white. color. It has citrus. odor.
What is MTFOAM used for?
Cleaning of carpets, textiles, glass, upholstery, vinyl, leather, cars, aluminium or PVC, both indoors and outdoors.
What are the hazard statements for MTFOAM?
This substance has 2 hazard statements:
- H229: Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.