Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Fmoc-Thr(But)-OH
- Product Code
- FT2515
Regulatory Identifiers
- CAS Number
- 71989-35-0 Check regulations →
Identified Uses
Laboratory chemicals, Manufacture of substances
Manufacturers & Suppliers
Advanced ChemTech
manufacturer
5609 Fern Valley Rd, Louisville, KY 40228 USA
+1 833-317-5620
Emergency Contacts
Chemtrec
+1 800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Synonyms : Fmoc-O-tert-butyl-L-threonine Formula : C23H27NO5 Molecular Weight : 397.48g/mole CAS-No. : 71989-35-0
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fmoc-O-tert-butyl-L-threonine | 71989-35-0 | --- | No |
For the full text of the H-Statements mentioned in this Section, see Section 16
Notes
No ingredients are hazardous according to OSHA criteria. No components need to be disclosed according to the applicable regulations.
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
Wash off with soap and plenty of water. Consult a physician.
Flush eyes with water as a precaution.
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Immediate Medical Attention
No data available
Medical Treatment
No data available
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Carbon oxides, nitrogen oxides (NOx)
Firefighter Protection
Wear self contained breathing apparatus for fire fighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid dust formation. Avoid breathing vapors, mist or gas. For personal protection see section 8.
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Sweep up and shovel.
Materials: suitable, closed containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide appropriate exhaust ventilation at places where dust is formed. For precautions, see section 2.2.
Keep container tightly closed in a dry and well-ventilated place. Recommended storage temperature: 2 - 8 °C Keep in a dry place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handle in accordance with good industrial hygiene and safety practice.
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., the type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No data available
No data available
No data available
Strong oxidizing agents
Other decomposition products - no data available. In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (N-[(9H-Fluoren-9-ylmethoxy)carbonyl]-O-isopropyl-L-threonine)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Fmoc-Thr(But)-OH?
The signal word is warning.
What is the physical form of Fmoc-Thr(But)-OH?
Fmoc-Thr(But)-OH is a solid appearing as white to off-white powder .
What is Fmoc-Thr(But)-OH used for?
Laboratory chemicals, Manufacture of substances
What are the hazard statements for Fmoc-Thr(But)-OH?
This substance has 1 hazard statement:
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Fmoc-Thr(But)-OH?
The melting point is 131 - 134 °C (268 - 273 °F) .