Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 7-Methoxy-2-methyl-4-quinolinol
- Product Code
- S512249
Regulatory Identifiers
- CAS Number
- 103624-90-4 Check regulations →
Identified Uses
Laboratory chemicals Manufacture of substances
Manufacturers & Suppliers
Merck Life Science BV
manufacturer
Ildefonse Vandammestraat 5/7B B-1560 HOEILAART
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 7-Methoxy-2-methyl-4-quinolinol | 103624-90-4 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Consult a physician.
After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Immediate Medical Attention
Consult a physician.
Medical Treatment
No data available
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water Foam Carbon dioxide (CO2) Dry powder
For this substance/mixture no limitations of extinguishing agents are given.
Carbon oxides, Nitrogen oxides (NOx). Combustible. Development of hazardous combustion gases or vapours possible in the event of fire.
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up dry. Clean up affected area.
Related Products
Similar products with comparable safety profiles
4-CHLORO-7-METHOXY-QUINOLINE
CAS: 68500-37-8
6-Bromo-2-cyclohexylquinazolin-4(3H)-one
---
Quinoline-5-carboxylic acid
CAS: 7250-53-5
4-Methoxy-4-methyl-2-pentanone
CAS: 107-70-0
3-Chloro-7,8-dihydroisoquinolin-5(6H)-one
CAS: 1105662-39-2
7,7,8,8-Tetracyanoquinodimethane
CAS: 1518-16-7
7-(4-Hydroxy-3-methoxyphenyl)-5-methoxy-1-phenylheptan-3-one
CAS: 83161-95-9
Quinoline
CAS: 91-22-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
Tightly closed. Dry.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L. Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2. The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature) .
The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.
No data available
no information available
Oxidizing agents
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 7-Methoxy-2-methyl-4-quinolinol?
The signal word is danger.
What is the physical form of 7-Methoxy-2-methyl-4-quinolinol?
7-Methoxy-2-methyl-4-quinolinol is a solid with no data available color. It has no data available odor.
What is 7-Methoxy-2-methyl-4-quinolinol used for?
Laboratory chemicals Manufacture of substances
What are the hazard statements for 7-Methoxy-2-methyl-4-quinolinol?
This substance has 3 hazard statements:
- H302: Harmful if swallowed.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
What is the melting point of 7-Methoxy-2-methyl-4-quinolinol?
The melting point is Melting point/range: 252 - 256 °C and the boiling point is No data available.