2-Chloro-3,4,4,4-tetrafluoro-3-(trifluoromethyl)but-1-ene

If fumes, aerosols or combustion products are inhaled remove from contaminated area. Other measures are usually unnecessary.

Flush skin and hair with running water (and soap if available).

Wash out immediately with fresh running water. Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.

Immediately give a glass of water. First aid is not generally required.

Use extinguishing media suitable for surrounding area.

There is no restriction on the type of extinguisher which may be used.

Non combustible. Not considered a significant fire risk, however containers may burn. May emit corrosive fumes.

Alert Fire Brigade and tell them location and nature of hazard. Use fire fighting procedures suitable for surrounding area. DO NOT approach containers suspected to be hot. Cool fire exposed containers with water spray from a protected location. If safe to do so, remove containers from path of fire.

See section 8

Clean up all spills immediately. Avoid breathing vapours and contact with skin and eyes. Control personal contact with the substance, by using protective equipment. Contain and absorb spill with sand, earth, inert material or vermiculite. Wipe up. Place in a suitable, labelled container for waste disposal.

Moderate hazard. Clear area of personnel and move upwind. Alert Fire Brigade and tell them location and nature of hazard. Wear breathing apparatus plus protective gloves. Prevent, by any means available, spillage from entering drains or water course. Stop leak if safe to do so. Contain spill with sand, earth or vermiculite. Collect recoverable product into labelled containers for recycling. Neutralise/decontaminate residue (see Section 13 for specific agent). Collect solid residues and seal in labelled drums for disposal. Wash area and prevent runoff into drains. After clean up operations, decontaminate and launder all protective clothing and equipment before storing and re-using. If contamination of drains or waterways occurs, advise emergency services.

See section 12

Wipe up. Collect recoverable product into labelled containers for recycling. Neutralise/decontaminate residue. Collect solid residues and seal in labelled drums for disposal. Wash area and prevent runoff into drains.

Materials: sand, earth, inert material or vermiculite

Avoid all personal contact, including inhalation. Wear protective clothing when risk of exposure occurs. Use in a well-ventilated area. Avoid contact with moisture. Avoid contact with incompatible materials. When handling, DO NOT eat, drink or smoke. Keep containers securely sealed when not in use. Avoid physical damage to containers. Always wash hands with soap and water after handling. Work clothes should be laundered separately. Launder contaminated clothing before re-use. Use good occupational work practice. Observe manufacturer's storage and handling recommendations contained within this SDS. Atmosphere should be regularly checked against established exposure standards to ensure safe working conditions are maintained.

Polyethylene or polypropylene container. Packing as recommended by manufacturer. Check all containers are clearly labelled and free from leaks.

When handling, DO NOT eat, drink or smoke. Always wash hands with soap and water after handling. Work clothes should be laundered separately. Launder contaminated clothing before re-use.

See section 5

General exhaust is adequate under normal operating conditions. Local exhaust ventilation may be required in specific circumstances. If risk of overexposure exists, wear approved respirator. Correct fit is essential to obtain adequate protection. Provide adequate ventilation in warehouse or closed storage areas.

Wear chemical protective gloves, e.g. PVC. The selection of suitable gloves does not only depend on the material, but also on further marks of quality which vary from manufacturer to manufacturer. Select gloves tested to a relevant standard (e.g. Europe EN 374, US F739, AS/NZS 2161.1 or national equivalent). When prolonged or frequently repeated contact may occur, a glove with a protection class of 5 or higher (breakthrough time greater than 240 minutes according to EN 374, AS/NZS 2161.10.1 or national equivalent) is recommended. When only brief contact is expected, a glove with a protection class of 3 or higher (breakthrough time greater than 60 minutes according to EN 374, AS/NZS 2161.10.1 or national equivalent) is recommended. For general applications, gloves with a thickness typically greater than 0.35 mm, are recommended.

Safety glasses with side shields. Chemical goggles. [AS/NZS 1337.1, EN166 or national equivalent]. Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants.

If risk of overexposure exists, wear approved respirator.

Overalls. P.V.C apron. Barrier cream. Skin cleansing cream. Wear safety footwear or safety gumboots, e.g. Rubber.

See section 12

Unstable in the presence of incompatible materials.Product is considered stable.

See section 7.2

Hazardous polymerisation will not occur.

See section 7.2

See section 7.2

See section 5.3