NextSDS Logo
Safety Data Sheet EN

SC Johnson Professional Glade® Aerosol - Pacific Breeze

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SC Johnson Professional Glade® Aerosol - Pacific Breeze

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Air care products

Uses advised against

None known.

Manufacturers & Suppliers

S

SC Johnson Professional Ltd.

national supplier

Denby, DE5 8JZ, UK

+44 (0) 1773 855 100

S

SC Johnson Professional GmbH

national supplier

Girmesgath, 47803 Krefeld, EU

Emergency Contacts

Care Center

0800 353 353

Care Center

1800 409 176

Irish Poison Center

(01)809 2166

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Aerosol Cat. 2

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H223 Flammable aerosol.
H229 Pressurised container: May burst if heated.

Precautionary Statements

P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Quaternary ammonium compounds, benzyl-C12-16-alkyldimethyl, chlorides EC: 270-325-2 68424-85-1 0.1% Yes
butane EC: 203-448-7 106-97-8 5 - 10% Yes
2-methylbutane EC: 201-142-8 78-78-4 0.1% Yes
propane-1,2-diol EC: 200-338-0 57-55-6 0.1% No
1,3-butadiene EC: 203-450-8 106-99-0 0.1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If breathing is affected, get medical attention.

Symptoms: Intentional misuse by deliberately concentrating and inhaling contents can be harmful or fatal. No adverse effects expected when used as directed.

Skin contact

Rinse with plenty of water. Get medical attention if irritation develops and persists.

Symptoms: May cause skin irritation. No adverse effects expected when used as directed.

Eye contact

Rinse with plenty of water. Get medical attention if irritation develops and persists.

Symptoms: May irritate eyes. No adverse effects expected when used as directed.

Ingestion

If symptoms persist, call a physician.

Symptoms: May cause abdominal discomfort. No adverse effects expected when used as directed.

Medical Treatment

See Description of first aid measures unless otherwise stated.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Unsuitable media

High volume water jet

Specific hazards

Heating may cause an explosion.

Instructions

In case of fire and/or explosion do not breathe fumes.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus. Wear suitable protective clothing and gloves. Refer to current EN or National standard as appropriate.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment. Remove all sources of ignition. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.

Large spill

Dike large spills.

Environmental

Outside of normal use, avoid release to the environment. Prevent large amounts of product from entering drains. Do not flush into surface water or sanitary sewer system. Use appropriate containment to avoid environmental contamination.

Cleanup methods

Collect with non-combustible absorbent material and place in container for disposal according to local / national regulations (see section 13). Clean residue from spill site.

Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not breathe vapours or spray mist. Do not use in areas without adequate ventilation. Do not puncture. Keep away from sources of ignition - No smoking. Do not spray on a naked flame or any incandescent material.

Storage

Store in cool place. Do not freeze. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 °C.

Fire prevention

Keep away from sources of ignition - No smoking. Do not spray on a naked flame or any incandescent material.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Wear suitable gloves. Nitrile gloves – Thickness 0.12mm; Breakthrough time >2 hours. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Before removing gloves clean them with soap and water.

Eyes

No special requirements.

Respiratory

No personal respiratory protective equipment normally required.

Skin/Body

Wash contaminated clothing before re-use.

Environmental

Refer to section 6.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Properties Status
---
Metal Corrosion
---
Flammability
Sustains combustion
Solidification Point
---
Solubility
partly miscible
Decomposition Temperature
Test not applicable for this product type
Freezing Point
---
Relative Evaporation Rate
---
Colour Intensity
---
Relative Density
0.86 g/cm3 at 20 °Cestimated
Softening Point
---
Lower Explosive Limit
Test not applicable for this product type
Dynamic Viscosity
Test not applicable for this product type
Partition Coefficient
Test not applicable for this product type
Melting Point
Test not applicable for this product type
Odor Threshold
Test not applicable for this product type
Form
---
Appearance
aerosol
Ph
Test not applicable for this product type
Boiling Point
Test not applicable for this product type
Kinematic Viscosity
Test not applicable for this product type
Molecular Weight
---
Upper Explosive Limit
Test not applicable for this product type
Crystallisation Point
---
State Under Standard Conditions
---
Explosive Limits
---
Solubility In Fat
---
Colour
colourless
Voc Content
---
Vapor Pressure
Test not applicable for this product type
Evaporation Rate
Test not applicable for this product type
Bulk Density
---
Vapor Density
Test not applicable for this product type
Solubility In Water
---
Auto Ignition Temperature
not auto-flammable
Cloud Point
---
Odor
Marine/Ozone
Density
---
Flash Point
79 °C Method: Tag Closed Cup (TCC) liquid -7 °C Method: Tag Closed Cup (TCC) Propellant
Physical State
aerosol
Physical State Data
aerosol
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No dangerous reaction known under conditions of normal use.

Hazardous reactions

None known.

Avoid

Heat, flames and sparks.

Incompatible

None known.

Decomposition

No decomposition if stored and applied as directed.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS, Flammable
Transport Class
2
ADR

Limited quantities, derogation may be applicable to this product, please check transport documents.

IMDG

Limited quantities, derogation may be applicable to this product, please check transport documents.

IATA

Limited quantities, derogation may be applicable to this product, please check transport documents.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SC Johnson Professional Glade® Aerosol - Pacific Breeze?

The signal word is warning.

What is the physical form of SC Johnson Professional Glade® Aerosol - Pacific Breeze?

SC Johnson Professional Glade® Aerosol - Pacific Breeze is a aerosol appearing as aerosol with colourless color. It has marine/ozone odor.

What is the solubility of SC Johnson Professional Glade® Aerosol - Pacific Breeze?

partly miscible

What is SC Johnson Professional Glade® Aerosol - Pacific Breeze used for?

Air care products

What are the hazard statements for SC Johnson Professional Glade® Aerosol - Pacific Breeze?

This substance has 2 hazard statements:

  • H223: Flammable aerosol.
  • H229: Pressurised container: May burst if heated.

What is the melting point of SC Johnson Professional Glade® Aerosol - Pacific Breeze?

The melting point is Test not applicable for this product type and the boiling point is Test not applicable for this product type.