NextSDS Logo
Safety Data Sheet EN

MAGNAVIS® WHITE CONTRAST PAINT WCP-2

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MAGNAVIS® WHITE CONTRAST PAINT WCP-2
Product Form
Aerosol

Regulatory Identifiers

CAS Number
N/A

Identified Uses

White Contrast paint used in Magnetic Particle Inspection

Manufacturers & Suppliers

I

ITW INDIA PRIVATE LIMITED

manufacturer

PLOT NO 51, 52,207 & 208, PHASE – 2, IDA TSIIC, PASHAMMYLARAM, SANGAREDDY – 502 307, TELANGANA INDIA.

91 – 8455 – 224710

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1
Press. Gas (Liq.)
Eye Irrit. Cat. 2A
STOT SE Cat. 3

GHS Pictograms

GHS02 - Flammable

GHS02

GHS04 - Compressed gas

GHS04

GHS07 - Health hazard

GHS07

Hazard Statements

H222 Extremely flammable aerosol.
H280 Contains gas under pressure; may explode if heated.
H280 May displace oxygen and cause rapid suffocation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Pressurised container: Do not pierce or burn, even after use.
P261 Avoid breathing dust/fumes/gas/mist/vapours/spray.
P264 Wash hands thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear eye protection/face protection.
P304 + P340 If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312 Call a doctor if you feel unwell.
P337 + P313 If eye irritation persists: Get medical advice / attention.
P403 Store in a well-ventilated place.
P405 Store locked up.
P410 + P412 Protect from sunlight. Donot expose to temperatures exceeding 50 deg C.
P501 Dispose of contents / container in accordance with local/regional/national/international regulations

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
2-Propanone 67-64-1 60 - 100% Yes
Titanium oxide 13463-67-7 10 - 30% Yes
Iso-butane(propellant) 75-28-5 30% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air

Symptoms: dizzy or nauseated

Skin contact

Wash off with soap water .Use soothing lotion

Eye contact

Rinse carefully under upper and lower eyelids using plenty of water

Ingestion

Do not induce vomiting.

Immediate Medical Attention

In all severe cases, contact physician immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide, Foam, Water, DCP

Specific hazards

Aerosol cans may burst over 55 deg C and add contents to fire. Ignition can occur if used near flames, arcs or other ignition sources.

Instructions

Keep containers cool with water spray.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Cleanup methods

Mop up or Sweep up

Materials: absorbent

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid eye contact. Avoid repeated or prolonged skin contact. Avoid breathing spray mist.

Fire prevention

Keep away from sources of ignition. Take measures to prevent build up of electro static charge.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use where ventilation will carry spray mist away from occupied areas

Hands

Wear nitrile rubber / neoprene gloves if hand exposure is unavoidable.

Eyes

Wear safety glasses to protect eyes.

Respiratory

Respirator with filter if sprayed in enclosed, unventilated space.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Aerosol containing mobile, white liquid
Physical State Data
aerosol
State Under Standard Conditions
---
Appearance
Aerosol containing mobile, white liquid
Colour
---
Colour Intensity
---
Form
---
Odor
Solvent-alcoholic
Odor Threshold
---
Ph
Neutral
Melting Point
---
Boiling Point
56 deg C
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
770 (BuAc=100)
Vapor Pressure
185 mm Hg @ 20 deg C
Vapor Density
Heavier than air
Relative Density
---
Bulk Density
---
Density
0.93 g/cm^{3}
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
70%
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Decomposition

Soot, oxides of carbon if heated to combustion temperatures

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
Aerosols, flammable
Transport Class
2.1
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MAGNAVIS® WHITE CONTRAST PAINT WCP-2?

The signal word is danger.

What is the physical form of MAGNAVIS® WHITE CONTRAST PAINT WCP-2?

MAGNAVIS® WHITE CONTRAST PAINT WCP-2 is a aerosol containing mobile, white liquid appearing as aerosol containing mobile, white liquid . It has solvent-alcoholic odor.

What is MAGNAVIS® WHITE CONTRAST PAINT WCP-2 used for?

White Contrast paint used in Magnetic Particle Inspection

What are the hazard statements for MAGNAVIS® WHITE CONTRAST PAINT WCP-2?

This substance has 5 hazard statements:

  • H222: Extremely flammable aerosol.
  • H280: Contains gas under pressure; may explode if heated.
  • H280: May displace oxygen and cause rapid suffocation.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.