Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- NOFIRNO
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
BEELE Engineering BV
manufacturer
Beunkdijk 11, 7122 NZ AALTEN, The Netherlands
+31 (0)543 461629
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of polydimethylsiloxane, fire retardant fillers and crosslinker
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| OXIMINOSILANE(S) | --- | 5% | Yes |
| 3-AMINOPROPYLTRIETHOXYSILANE | 919-30-2 | 5% | Yes |
| 2-BUTANONE OXIME | 96-29-7 | --- | Yes |
When exposed to air humidity release of: 2-BUTANONE OXIME (CAS: 96-29-7): release during curing is 1,2% (max) of the pure silicone polymer; the release of the NOFIRNO compound is 0.7% (max) due to the addition of fillers.
Notes
Terracotta/Blue grey
First Aid Measures
Emergency procedures for chemical exposure incidents
Affected person should be removed from the contaminated area into fresh air.
Wipe off using a clean, soft, absorbent material.
If substance has got into the eyes, immediately wash out with plenty of water until medical assistance is provided. Retract eyelids often.
Immediate Medical Attention
Consult a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, CO2, dry powder, water spray
In case of fire and/or explosion do not breathe fumes
Firefighter Protection
Wear breathing apparatus
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
This product does not present a particular risk to the environment
Take up mechanically. Transfer to a container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Work in well-ventilated room.
Store between 5 °C and 40 °C. No further specific measures necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work area.
Wear rubber gloves.
Chemical safety glasses.
In the event of insufficient ventilation: respiratory protective device with a gas filter.
Wear protective clothing and chemical safety glasses.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal usage conditions
None known
None known
In case of fire CO, CO2, oxides of silicone and oxides of nitrogen; during normal curing 2-butanone oxime and methanol vapours may be emitted.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for NOFIRNO?
The signal word is no signal word.
What is the physical form of NOFIRNO?
NOFIRNO is a thixotropic paste appearing as thixotropic paste . It has ethereal, slight amine odor.
What is the solubility of NOFIRNO?
Insoluble
What is the melting point of NOFIRNO?
The melting point is Not applicable .