Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Polyethylene Glycol Diacrylate (n=approx. 9) (stabilized with MEHQ)
- Product Code
- P2708
Regulatory Identifiers
- CAS Number
- 26570-48-9 Check regulations →
Identified Uses
Use as laboratory reagent
Manufacturers & Suppliers
TCI EUROPE N.V.
manufacturer
Boereveldseweg 6 - Haven 1063, B-2070 Zwijndrecht, Belgium
+32 (0)3 735 07 00
Emergency Contacts
Emergency Contact
+44 844 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Polyethylene Glycol Diacrylate (n=approx. 9) (stabilized with MEHQ)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polyethylene Glycol Diacrylate | 26570-48-9 | 90 - 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Get medical advice/ attention if you feel unwell.
Take off all contaminated clothing immediately. Wash off with plenty of water. If skin irritation or rash occurs: Get medical advice/ attention.
Symptoms: Causes skin irritation. May cause an allergic skin reaction.
Rinse with plenty of water. If easy to do, remove contact lens, if worn. Immediately call a POISON CENTER or doctor/ physician.
Symptoms: Causes serious eye damage.
Rinse mouth. Get medical advice/ attention.
Immediate Medical Attention
Immediately call a POISON CENTER or doctor/ physician (for eye contact).
Medical Treatment
None known.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry powder, Foam, Water spray, Carbon dioxide (CO2)
No information available.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Cool closed containers exposed to fire with water spray. Remove undamaged containers from fire area if it is safe to do so.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear suitable protective equipment. Keep people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non-involved personnel should be controlled around the leakage area by roping off, etc.
Prevent product from entering drains.
Collect as much of the spill as possible with a suitable absorbent material.
Materials: suitable absorbent material
Related Products
Similar products with comparable safety profiles
Poly(ethylene glycol) diacrylate
CAS: 26570-48-9
Polyethylene glycol 20000 (stabilised) for synthesis
CAS: 25322-68-3
Acrylonitrile (stabilized with MEHQ)
---
Poly(ethylene glycol) methyl ether methacrylate
CAS: 26915-72-0
Ethylene glycol diacrylate
CAS: 2274-11-5
Poly(ethylene glycol)
CAS: 25322-68-3
Poly(ethylene glycol)
CAS: 25322-68-3
Poly(ethylene glycol)
CAS: 25322-68-3
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothing. Wear personal protective equipment. Wash hands and face thoroughly after handling.
Keep container tightly closed. Store in a cool and shaded area.
Wash hands and face thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Install a closed system or local exhaust. Also install safety shower and eye bath.
Protective gloves
Safety glasses Face-shield
Gas mask
Protective suit
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Polymerization may occur under the influences of heat, light or on contact with polymerization initiators such as peroxides etc.
No data available
Polymerization may occur under the influences of heat, light or on contact with polymerization initiators such as peroxides etc.
heat, light
polymerization initiators such as peroxides
No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Polyethylene Glycol Diacrylate (n=approx. 9) (stabilized with MEHQ)?
The signal word is danger.
What is the physical form of Polyethylene Glycol Diacrylate (n=approx. 9) (stabilized with MEHQ)?
Polyethylene Glycol Diacrylate (n=approx. 9) (stabilized with MEHQ) is a liquid with colourless - yellow color. It has no data available odor.
What is Polyethylene Glycol Diacrylate (n=approx. 9) (stabilized with MEHQ) used for?
Use as laboratory reagent
What are the hazard statements for Polyethylene Glycol Diacrylate (n=approx. 9) (stabilized with MEHQ)?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
What is the melting point of Polyethylene Glycol Diacrylate (n=approx. 9) (stabilized with MEHQ)?
The melting point is No data available and the boiling point is No data available.