Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Lithium Bis(trifluoromethanesulfonyl)imide
- Product Code
- B2542
Regulatory Identifiers
- CAS Number
- N/A
- EC Number
- 415-300-0 Check regulations →
Identified Uses
Use as laboratory reagent
Manufacturers & Suppliers
TCI EUROPE N.V.
manufacturer
Boereveldseweg 6 - Haven 1063, B-2070 Zwijndrecht, Belgium
+32 (0)3 735 07 00
Emergency Contacts
Emergency Contact
+44 844 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Substance name : Lithium Bis(trifluoromethanesulfonyl)imide Index-No. : 616-124-00-9 EC-No. : 415-300-0
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Lithium Bis(trifluoromethanesulfonyl)imide EC: 415-300-0 | 90076-65-6 | 90 - 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor/ physician.
Take off all contaminated clothing immediately. If on skin, rinse well with water. If skin irritation or rash occurs: Get medical advice/ attention.
Rinse with plenty of water. If easy to do, remove contact lens, if worn. Immediately call a POISON CENTER or doctor/ physician.
Immediately call a POISON CENTER or doctor/ physician. Rinse mouth.
Immediate Medical Attention
Immediately call a POISON CENTER or doctor/ physician.
Medical Treatment
None known.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry powder, Foam, Water spray, Carbon dioxide (CO2)
No information available.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Immediately evacuate personnel to safe areas. Remove undamaged containers from fire area if it is safe to do so.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep people away from and upwind of spill/leak. Entry to non-involved personnel should be controlled around the leakage area by roping off, etc.
Prevent product from entering drains.
Pick up and arrange disposal without creating dust.
Related Products
Similar products with comparable safety profiles
Lithium Tetraborate/Lithium Metaborate/Lithium Bromide
---
LITHIUM DODECYL SULFATE
CAS: 2044-56-6
Lithium tetraborate
CAS: 12007-60-2
Lithium Dodecyl Sulfate
CAS: 2044-56-6
Lithium chloride
CAS: 7447-41-8
Bismuth(III) trifluoromethanesulfonate
CAS: 88189-03-1
Lithium hydride
CAS: 7580-67-8
Lithium
CAS: 7439-93-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothing. Wear personal protective equipment. Wash hands and face thoroughly after handling.
Keep container tightly closed. Store in a cool and shaded area. Protect from moisture. Keep under inert gas. Store locked up.
Wash hands and face thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Install a closed system or local exhaust. Also install safety shower and eye bath.
Impervious gloves
Safety glasses, Safety goggles, Face-shield
Dustproof gas mask, Self-contained breathing apparatus
Impervious protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No data available
None under normal processing.
Exposure to moisture
Oxidizing agents
Carbon monoxide, Carbon dioxide (CO2), Nitrogen oxides (NOx), Sulphur oxides, Hydrogen fluoride
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2923
- Shipping Name
- CORROSIVE SOLID, TOXIC, N.O.S.
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Lithium Bis(trifluoromethanesulfonyl)imide?
The signal word is danger.
What is the physical form of Lithium Bis(trifluoromethanesulfonyl)imide?
Lithium Bis(trifluoromethanesulfonyl)imide is a solid form with white color. It has no data available odor.
What is Lithium Bis(trifluoromethanesulfonyl)imide used for?
Use as laboratory reagent
What are the hazard statements for Lithium Bis(trifluoromethanesulfonyl)imide?
This substance has 4 hazard statements:
- H301 + H311: Toxic if swallowed or in contact with skin.
- H314: Causes severe skin burns and eye damage.
- H373: May cause damage to organs through prolonged or repeated exposure.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Lithium Bis(trifluoromethanesulfonyl)imide?
The melting point is 235 °C and the boiling point is No data available.