Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium peroxodisulfate a.r.
- Product Code
- CL00.1474
Regulatory Identifiers
- CAS Number
- 7775-27-1 Check regulations →
- REACH No.
- 01-2119495975-15
Identified Uses
Reagent for analysis In compliance with the conditions described in the annex to this safety data sheet.
Manufacturers & Suppliers
AnalytiChem Belgium NV
manufacturer
Industriezone “De Arend” 2 B-8210 ZEDELGEM - BELGIUM
+32 50 28 83 20
Emergency Contacts
Emergency Contact
00 (32) 50.28.83.20
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium peroxodisulfate a.r. EC: 231-892-1 | 7775-27-1 | 99% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air, seek medical advice.
Wash off with plenty of water. Remove contaminated clothing.
Rinse out with plenty of water for at least 10 minutes with the eyelid held wide open. Immediately call an ophtalmologist.
Never give anything by mouth to an unconscious person. Make victim drink water (two glasses at most), avoid vomiting (risk of perforation!). Immediately call in physician. Do not attempt to neutralize.
Immediate Medical Attention
Seek medical advice for inhalation. Immediately call an ophtalmologist for eye contact. Immediately call in physician for ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
In adaption to materials stored in the immediate neighbourhood.
Non-combustible. A fire-promoting effect must be considered possible when large amounts of the substance are stored.
Contain escaping vapours with water.
Firefighter Protection
Do not stay in dangerous zone without self-contained breathing apparatus. In order to avoid contact with skin, keep a safety distance and wear suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid substance contact. Ensure supply of fresh air in enclosed rooms.
Do not allow to enter sewerage system.
Clean up affected area.
Related Products
Similar products with comparable safety profiles
Sodium persulfate
CAS: 7775-27-1
Sodium persulfate
CAS: 7775-27-1
Sodium thiosulfate.5aq a.r.
CAS: 10102-17-7
Sodium peroxide
CAS: 1313-60-6
Sodium thiosulfate
CAS: 7772-98-7
Sodium sulphate
CAS: 7757-82-6
Sodium disulfite ≥ 97%, p.a., ACS
CAS: 7681-57-4
Sodium sulfate
CAS: 7757-82-6
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid all contact, do not inhale gas/fume/vapour/spray. For precautions see section 2.2
Tightly closed and dry.
away from sources of ignition, combustible materials and heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective clothing should be selected specificlly for the working place, depending on concentration and quantity of the hazardous substances handled. The resistance of the protective clothing to chemicals should be ascertained with the respective supplier. See section 7.1. Work under hood.
Required.
Required.
Required when vapours/aerosols/dust are generated. The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Required.
Do not allow to enter sewerage system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No further relevant information available.
See section 10.3
heat and sun light
acids, metals, combustible materials
No further relevant information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1505
- Shipping Name
- Sodium persulfate
- Transport Class
- 5.1
- Packing Group
- III
Tunnel restriction code (E)
yes
yes
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium peroxodisulfate a.r.?
The signal word is danger.
What is the physical form of Sodium peroxodisulfate a.r.?
Sodium peroxodisulfate a.r. is a solid with colourless color. It has odourless odor.
What is Sodium peroxodisulfate a.r. used for?
Reagent for analysis In compliance with the conditions described in the annex to this safety data sheet.
What are the hazard statements for Sodium peroxodisulfate a.r.?
This substance has 7 hazard statements:
- H272: May intensify fire; oxidiser.
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H335: May cause respiratory irritation.
What is the melting point of Sodium peroxodisulfate a.r.?
The melting point is 100° (dec.) .