Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ethylenediaminetetraacetic acid disodium salt dihydrate AnalaR NORMAPUR® Reag. Ph.Eur., ACS Analytical Reagent
- Product Code
- 20302
Regulatory Identifiers
- CAS Number
- 6381-92-6 Check regulations →
- REACH No.
- 01-2119486775-20-XXXX
Identified Uses
General chemical reagent
Manufacturers & Suppliers
VWR International Ltd.
national supplier
Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN
0800 22 33 44
Emergency Contacts
CareChem24
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| EDTA disodium salt dihydrate | 6381-92-6 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration. In case of respiratory tract irritation, consult a physician.
Symptoms: respiratory tract irritation
After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. In case of skin reactions, consult a physician.
Symptoms: skin reactions
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.
If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting. Give nothing to eat or drink.
Immediate Medical Attention
Obtain immediate medical attention if swallowed. Consult a physician in case of respiratory tract irritation, skin reactions, or if symptoms are observed. Consult an ophthalmologist for eye contact.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings.
no restriction
In case of fire may be liberated: Carbon monoxide, Carbon dioxide (CO2), Nitrogen oxides (NOx)
DO NOT fight fire when fire reaches explosives.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Clear spills immediately.
Do not allow to enter into surface water or drains.
Clean contaminated articles and floor according to the environmental legislation.
Related Products
Similar products with comparable safety profiles
tri-Sodium citrate dihydrate AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent
CAS: 6132-04-3
di-Sodium hydrogen phosphate, anhydrous AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent
CAS: 7558-79-4
Ammonium acetate AnalaR NORMAPUR® Reag. Ph.Eur., ACS
CAS: 631-61-8
Ammonium thiocyanate AnalaR NORMAPUR® Reag. Ph. Eur. analytical reagent
CAS: 1762-95-4
Sodium thiosulphate pentahydrate AnalaR NORMAPUR® ACS analytical reagent
CAS: 10102-17-7
Sodium carbonate AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent
CAS: 497-19-8
Sodium sulphate, anhydrous AnalaR NORMAPUR® Reag. Ph. Eur. analytical reagent
CAS: 7757-82-6
Orthophosphoric acid 85% AnalaR NORMAPUR® Reag. Ph.Eur., ACS
CAS: 7664-38-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid: Inhalation. Avoid contact with eyes and skin. Protect from moisture.
Keep container tightly closed and in a well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms: EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time (maximum wearing time): > 480 min, Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time (maximum wearing time): > 480 min, Recommended glove articles: VWR 112-3717 / 112-1381
Eye glasses with side protection DIN-/EN-Norms: DIN EN 166. Recommendation: VWR 111-0432
Usually no personal respirative protection necessary.
Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
no data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
no data available
no data available
no data available
no data available
no data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ethylenediaminetetraacetic acid disodium salt dihydrate AnalaR NORMAPUR® Reag. Ph.Eur., ACS Analytical Reagent?
The signal word is warning.
What is the physical form of Ethylenediaminetetraacetic acid disodium salt dihydrate AnalaR NORMAPUR® Reag. Ph.Eur., ACS Analytical Reagent?
Ethylenediaminetetraacetic acid disodium salt dihydrate AnalaR NORMAPUR® Reag. Ph.Eur., ACS Analytical Reagent is a solid with white color. It has no data available odor.
What is Ethylenediaminetetraacetic acid disodium salt dihydrate AnalaR NORMAPUR® Reag. Ph.Eur., ACS Analytical Reagent used for?
General chemical reagent
What are the hazard statements for Ethylenediaminetetraacetic acid disodium salt dihydrate AnalaR NORMAPUR® Reag. Ph.Eur., ACS Analytical Reagent?
This substance has 2 hazard statements:
- H332: Harmful if inhaled.
- H373: May cause damage to organs through prolonged or repeated exposure.
What is the melting point of Ethylenediaminetetraacetic acid disodium salt dihydrate AnalaR NORMAPUR® Reag. Ph.Eur., ACS Analytical Reagent?
The melting point is 248 °C and the boiling point is no data available.