NextSDS Logo
Safety Data Sheet EN

8E-Zyme

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
8E-Zyme
Product Form
Mixture
Product Code
1C39

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Enzymatic Cleaner

Uses advised against

No additional information available.

Manufacturers & Suppliers

M

Medisafe UK Ltd.

manufacturer

Twyford Road Bishop’s Stortford, Hertfordshire CM23 3LJ UK

S

STERIS Ireland Limited

distributor

IDA Business and Technology Park Tullamore County Offaly R35 X865 Ireland.

+44 (0) 116 276 8636

Emergency Contacts

Emergency Contact

+44 (0) 1895 622 639

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Irrit. Cat. 2B H320
Resp. Sens. Cat. 1 H334

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H320 Causes eye irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.

Precautionary Statements

P261 Avoid breathing mist, spray, vapours.
P264 Wash hand thoroughly after handling.
P284 In case of inadequate ventilation, wear respiratory protection.
P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical attention.
P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Subtilisins (proteolytic enzymes) EC: 232-752-2 9014-01-1 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove patient to fresh air and keep at rest in a position comfortable for breathing. If not breathing, give artificial respiration. Get medical attention.

Symptoms: May cause allergy or asthma symptoms or breathing difficulties if inhaled.

Skin contact

Immediately flush skin with plenty of water for at least 15 minutes. Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Get medical advice/attention.

Symptoms: May cause allergic skin reaction.

Eye contact

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately get medical attention.

Symptoms: Causes eye irritation.

Ingestion

If victim completely conscious/alert. Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER or doctor/physician. Give water or milk if the person is fully conscious.

Immediate Medical Attention

Get medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing media appropriate for surrounding fire.

Specific hazards

No additional information available.

Instructions

Exercise caution when fighting any chemical fire.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection. Wear a self contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not breathe fumes, vapors. Avoid contact with skin, eyes and clothes. Stop leak if safe to do so. Spilled material may present a slipping hazard.

Small spill

Small spills may be flushed to a sanitary sewer with copious amounts of water, if in accordance with local, state or national legislation.

Large spill

Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.

Environmental

Prevent entry to sewers and public waters.

Cleanup methods

Spills may be picked up with a mop and followed by a water rinse. Residue may be washed down with water.

Materials: inert solids, such as clay or diatomaceous earth

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Read label before use. Provide good ventilation in process area to prevent formation of vapour. Avoid all eye and skin contact and do not breathe vapour and mist. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

Storage

Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use. Keep the packing dry and well sealed to prevent contamination and absorbtion of humidity. Store away from direct sunlight or other heat sources.

Hygiene

Take care for general good hygiene and housekeeping. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation. Control airborne concentrations below the exposure limits..

Hands

Wear rubber gloves or latex-free gloves.

Eyes

Wear chemical splash googles or safety glasses.

Respiratory

Work in well-ventilated zones or use proper respiratory protection. In fine dispersion/spraying/misting: Wear suitable respiratory equipment.

Skin/Body

Wear suitable protective clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Explosive Limits
---
Flash Point
No data available
Physical State
Liquid
Properties Status
---
State Under Standard Conditions
---
Vapor Pressure
No data available
Partition Coefficient
No data available
Solubility In Fat
---
Melting Point
No data available
Molecular Weight
---
Density
Approx 1.023 g/ml Specific Gravity
Metal Corrosion
---
Boiling Point
No data available
Ph
6.5 – 7.5
Auto Ignition Temperature
No data available
Form
---
Odor
Mild chemical or detergent
Colour Intensity
---
Colour
Blue, Clear to slightly hazy
Softening Point
---
Vapor Density
---
Bulk Density
---
Relative Density
No data available
Relative Evaporation Rate
No data available
Cloud Point
---
Appearance
---
Odor Threshold
No data available
Evaporation Rate
---
Upper Explosive Limit
No data available.
Flammability
No data available
Solubility
Water: Completely soluble
Voc Content
---
Kinematic Viscosity
No data available
Physical State Data
liquid
Solubility In Water
---
Decomposition Temperature
No data available
Lower Explosive Limit
No data available.
Solidification Point
---
Crystallisation Point
---
Dynamic Viscosity
No data available
Freezing Point
No data available
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of use.

Reactivity

No additional information available.

Hazardous reactions

Hazardous polymerization will not occur.

Avoid

Heat. Light.

Incompatible

Strong oxidizers.

Decomposition

Hazardous decomposition products may be released during prolonged heating like smokes, carbon monoxide and dioxide. Aldehydes.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 8E-Zyme?

The signal word is danger.

What is the physical form of 8E-Zyme?

8E-Zyme is a liquid with blue, clear to slightly hazy color. It has mild chemical or detergent odor.

What is the solubility of 8E-Zyme?

Water: Completely soluble

What is 8E-Zyme used for?

Enzymatic Cleaner

What are the hazard statements for 8E-Zyme?

This substance has 2 hazard statements:

  • H320: Causes eye irritation.
  • H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.

What is the melting point of 8E-Zyme?

The melting point is No data available and the boiling point is No data available.