Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sikaflex® EBT Colours
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sealant/adhesive
Manufacturers & Suppliers
Sika Limited
manufacturer
Watchmead Welwyn Garden City Hertfordshire AL7 1BQ United Kingdom
+44 (0)1707 394444
Emergency Contacts
Emergency Contact
+44 (0)1707 363899
available during office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Urea,N,N''-(methylenedi-4,1-phenylene)bis[N'-butyl- EC: 416-600-4 | 77703-56-1 | 2.5 - 5% | Yes |
| Pentamethyl piperidylsebacate EC: 915-687-0 | --- | 0.025 - 0.25% | Yes |
| Hardener LI (Isophoronedialdimine) EC: 700-071-4 | 932742-30-8 | 0.025 - 0.25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Consult a physician after significant exposure.
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician.
Symptoms: Allergic reactions. May cause an allergic skin reaction.
Remove contact lenses. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Do not induce vomiting without medical advice. Rinse mouth with water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Standard procedure for chemical fires.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Deny access to unprotected persons.
Do not flush into surface water or sanitary sewer system.
Soak up with inert absorbent material. Keep in suitable, closed containers for disposal.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe vapours or spray mist. Avoid exceeding the given occupational exposure limits (see section 8). Do not get in eyes, on skin, or on clothing.
Keep container tightly closed in a dry and well-ventilated
Handle in accordance with good industrial hygiene and safety practice. When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical-resistant, impervious gloves complying with an approved standard must be worn at all times when handling chemical products. Reference number EN 374. Follow manufacturer specifications. Suitable for short time use or protection against splashes: Butyl rubber/nitrile rubber gloves (0,4 mm), Contaminated gloves should be removed. Suitable for permanent exposure: Viton gloves (0.4 mm), breakthrough time >30 min.
Safety glasses with side-shields conforming to EN166 Eye wash bottle with pure water
No special measures required.
Protective clothing (e.g. Safety shoes acc. to EN ISO 20345, long-sleeved working clothing, long trousers). Rubber aprons and protective boots are additionaly recommended for mixing and stirring work.
General advice : Do not flush into surface water or sanitary sewer system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
No dangerous reaction known under conditions of normal use.
Stable under recommended storage conditions.
No data available
No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sikaflex® EBT Colours?
The signal word is warning.
What is the physical form of Sikaflex® EBT Colours?
Sikaflex® EBT Colours is a paste appearing as paste with various color. It has odourless odor.
What is Sikaflex® EBT Colours used for?
Sealant/adhesive
What are the hazard statements for Sikaflex® EBT Colours?
This substance has 1 hazard statement:
- H317: May cause an allergic skin reaction.
What is the melting point of Sikaflex® EBT Colours?
The melting point is No data available and the boiling point is No data available.