NextSDS Logo
Safety Data Sheet EN

Fire Extinguisher Carbon Dioxide (CO₂)

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Fire Extinguisher Carbon Dioxide (CO₂)
Chemical Name
Carbonic Acid Gas

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Used in the application of extinguishing fires

Manufacturers & Suppliers

S

STEEL RECON INDUSTRIES SDN BHD

manufacturer

NO.8, PERSIARAN SUBANG (JALAN SUBANG 7), TAMAN PERINDUSTRIAN SUBANG, 47610 SUBANG JAYA, SELANGOR DARUL EHSAN, MALAYSIA.

603-80232323

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

GASES UNDER PRESSURE - Liquefied gas
Simple asphyxiant

GHS Pictograms

GHS04 - Compressed gas

GHS04

Hazard Statements

H270 May displace oxygen and cause rapid suffocation.
H280 Contains gas under pressure: may explode if heated.
H350 May cause frostbite.
May increase respiration and heart rate.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read and follow all Safety Data Sheets (SDS) before use.
P103 Read label before use.
P234 Close valve after each use and when empty.
P243 Use equipment rated for cylinder pressure.
P244 Do not open valve until connected to equipment prepared for use.
P260 Use only equipment of compatible materials of construction.
P271 Use a back-flow preventative device in the piping.
P271 Use and store only outdoors or in a well-ventilated place.
P403 Always keep container in upright position.
P403 Store in a well-ventilated place.
P410 Protect from sunlight.
P410 Protect from sunlight when ambient temperature exceeds 52°C/125°F.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Carbon Dioxide 124-38-9 99.5% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air, If not breathing, give artificial respiration. Ensure that vomit has not obstructed airway.

Skin contact

For frostbit, allow affected body parts to thaw.

Eye contact

For frostbit rinse with warn water of 15 minutes

Ingestion

Maintain breathing

Immediate Medical Attention

Obtain medical attention immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

None necessary. Carbon dioxide is non- flammable and itself used as an extinguisher agent. Use extinguishing agents appropriate for surrounding fire.

Specific hazards

Non-flammable. Pressurized containers may rupture or explode if exposed to sufficient heat.

Instructions

Move cylinder from fire is safe to do so. Cool cylinder with water spray until well after the fire is out. Stay away from the end of tanks. For fires in cargo or storage area: Cool containers with water from manned hose holder or monitor nozzles until well after fire is out. If this is impossible then take the following precautions: Keep unnecessary people away, isolate hazard area and deny entry. Let the fire burn. Use extinguishing agents appropriate for surrounding fire. Cool cylinders with water. Apply water from a protected location or from a safe distance.

Firefighter Protection

Wear self-contained breathing apparatus in fires where large amount of product are involved.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

If spillage occurs in an enclosed space with poor ventilation there is a danger of asphyxiation, wear self-contained breathing apparatus. The gas in heavier than air and will accumulate at floor lever and in low- lying areas.

Environmental

None necessary

Cleanup methods

Liquid Carbon Dioxide will evaporate at room temperature. If spillage occurs indoors, provide adequate ventilation to minimize the danger of asphyxiation. No other special procedures are necessary.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Put on appropriate personal protective equipment (see Section 8). Contains gas under pressure. Avoid contact with eyes, skin and clothing. Avoid breathing gas. Empty containers retain product residue and can be hazardous. Do not puncture or incinerate container. Use equipment rated for cylinder pressure. Close valve after each use and when empty. Protect cylinders from physical damage; do not drag, roll, slide, or drop. Use a suitable hand truck for cylinder movement.

Storage

Store in accordance with local regulations. Store in a segregated and approved area. Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10). Keep container tightly closed and sealed until ready for use. Cylinders should be stored upright, with valve protection cap in place, and firmly secured to prevent falling or being knocked over.

Hygiene

Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Gas. [Liquefied compressed gas.]
Physical State Data
gas
State Under Standard Conditions
---
Appearance
---
Colour
Colourless.
Colour Intensity
---
Form
---
Odor
Odourless.
Odor Threshold
---
Ph
---
Melting Point
Sublimation temperature: -79°C (-110.2 to °F)
Boiling Point
---
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
830 (psig)
Vapor Density
1.53 (Air = 1). Liquid Density @BP: Solid density = 97.5 lb/ft3 (1562 kg/m3)
Relative Density
---
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
0.83
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
44.01 g/mole
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable.

Reactivity

No specific test data related to reactivity available for this product or its ingredients.

Hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur. Hazardous polymerization will not occur.

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

No known toxicological effects from this product.

No known toxicological effects from this product.

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

the liquid may be allowed to evaporate

Disposal

With adequate ventilation and otherwise under conditions where the low temperature will not present hazard or problem, the liquid may be allowed to evaporate.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1044
Shipping Name
FIRE EXTINGUISHERS with compressed or liquid gas
Transport Class
2.2
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Fire Extinguisher Carbon Dioxide (CO₂)?

The signal word is warning.

What is the physical form of Fire Extinguisher Carbon Dioxide (CO₂)?

Fire Extinguisher Carbon Dioxide (CO₂) is a gas. [liquefied compressed gas.] with colourless. color. It has odourless. odor.

What is Fire Extinguisher Carbon Dioxide (CO₂) used for?

Used in the application of extinguishing fires

What are the hazard statements for Fire Extinguisher Carbon Dioxide (CO₂)?

This substance has 4 hazard statements:

  • H270: May displace oxygen and cause rapid suffocation.
  • H280: Contains gas under pressure: may explode if heated.
  • H350: May cause frostbite.
  • May increase respiration and heart rate.

What is the melting point of Fire Extinguisher Carbon Dioxide (CO₂)?

The melting point is Sublimation temperature: -79°C (-110.2 to °F) .