NextSDS Logo
Safety Data Sheet EN

HV046JJ

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
HV046JJ
Product Code
L6V

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Hydraulic oil.

Manufacturers & Suppliers

T

TOTAL LUBRIFIANTS

manufacturer

562 Avenue du Parc de L'île, 92029 Nanterre Cedex

+33 (0)1 41 35 40 00

Emergency Contacts

Emergency Contact

+33 1 49 00 00 49

24h/24, 7d/7

ORFILA (INRS)

+33 (0)1 45 42 59 59

PARIS: Hôpital Fernand Widal

01.40.05.48.48

MARSEILLE: Hopital Salvator

04.91.75.25.25

LYON: Hopital Edouard Herriot

04.72.11.69.11

NANCY: Hopital central

03.83.32.36.36

SAMU

15

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Do not contain hazardous substance nor substance with european workplace exposure limits in concentration above regulatory thresholds

Product containing mineral oil with less than 3% DMSO extract as measured by IP 346

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air.

Symptoms: Inhalation of vapors in high concentration may cause irritation of respiratory system.

Skin contact

Remove contaminated clothing and shoes. Wash skin with soap and water. Wash contaminated clothing before reuse.

Symptoms: High pressure jets may cause skin damage.

Eye contact

Rinse thoroughly with plenty of water, also under the eyelids.

Symptoms: Not classified.

Ingestion

Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Call a physician or Poison Control Center immediately.

Symptoms: Not classified. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.

Immediate Medical Attention

In this case, the casualty should be sent immediately to hospital.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide (CO₂). ABC powder. Foam. Water spray or fog.

Unsuitable media

Do not use a solid water stream as it may scatter and spread fire.

Specific hazards

Incomplete combustion and thermolysis may produce gases of varying toxicity such as carbon monoxide, carbon dioxide, various hydrocarbons, aldehydes and soot. These may be highly dangerous if inhaled in confined spaces or at high concentration.

Firefighter Protection

Wear self-contained breathing apparatus and protective suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not touch or walk through spilled material. Contaminated surfaces will be extremely slippery.

Environmental

Do not allow material to contaminate ground water system. Try to prevent the material from entering drains or water courses.

Cleanup methods

Collect with non-combustible absorbent material and place in container for disposal.

Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

When using, do not eat, drink or smoke. For personal protection see section 8. Use only in well-ventilated areas. Do not breathe vapors or spray mist. Avoid contact with skin, eyes and clothing.

Storage

Keep away from food, drink and animal feedingstuffs. Keep in a bunded area. Keep container tightly closed. Keep preferably in the original container. Protect from frost, heat and sunlight. Protect from moisture.

Hygiene

Ensure the application of strict rules of hygiene by the personnel exposed to the risk of contact with the product. Regular cleaning of equipment, work area and clothing is recommended. Wash hands before breaks and immediately after handling the product. Do not use abrasives, solvents or fuels. Do not dry hands with rags that have been contaminated with product. Do not put product contaminated rags into workwear pockets.

Fire prevention

Take precautionary measures against static discharges. Ground/bond containers, tanks and transfer/receiving equipment.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Apply technical measures to comply with the occupational exposure limits. When working in confined spaces (tanks, containers, etc.), ensure that there is a supply of air suitable for breathing and wear the recommended equipment.

Hands

Hydrocarbon-proof gloves: Fluorinated rubber, Nitrile rubber. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves.

Eyes

If splashes are likely to occur, wear: Safety glasses with side-shields.

Respiratory

When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Respirator with combination filter for vapour/particulate (EN 14387). The use of breathing apparatus must comply strictly with the manufacturer's instructions and the regulations governing their choices and uses.

Skin/Body

Wear suitable protective clothing. Protective shoes or boots. Long sleeved clothing.

Environmental

The product should not be allowed to enter drains, water courses or the soil.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
light yellow
Colour Intensity
---
Form
---
Odor
Oily
Odor Threshold
---
Ph
Not applicable
Melting Point
---
Boiling Point
No information available
Flash Point
254 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No information available
Vapor Pressure
No information available
Vapor Density
No information available
Relative Density
---
Bulk Density
---
Density
860 kg/m³ @ 15 °C
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
No information available
Decomposition Temperature
---
Solubility
---
Partition Coefficient
No information available
Solubility In Water
Insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
48.6 mm2/s @ 40 °C
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No information available.

Hazardous reactions

None under normal processing.

Avoid

Heat (temperatures above flash point), sparks, ignition points, flames, static electricity.

Incompatible

Strong oxidizing agents.

Decomposition

None under normal use.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Not classified. Acute aquatic toxicity - Product Information No information available. Acute aquatic toxicity - Component Information No information available. Chronic aquatic toxicity - Product Information No information available. Chronic aquatic toxicity - Component Information No information available. Effects on terrestrial organisms No information available.

12.2. Persistence and degradability

General Information No information available.

12.3. Bioaccumulative potential

Product Information No information available. logPow No information available Component Information No information available.

12.4. Mobility in soil

Soil Given its physical and chemical characteristics, the product generally shows low soil mobility.

12.5. Results of PBT and vPvB assessment

PBT and vPvB assessment No information available.

12.6. Other adverse effects

General Information No information available.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Should not be released into the environment. Dispose of in accordance with the European Directives on waste and hazardous waste. Dispose of in accordance with local regulations.

Disposal

Should not be released into the environment. Dispose of in accordance with the European Directives on waste and hazardous waste. Dispose of in accordance with local regulations.

Waste Codes

13 01 10 According to the European Waste Catalogue, Waste Codes are not product specific, but application specific. Waste codes should be assigned by the user based on the application for which the product was used. EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for HV046JJ?

The signal word is no signal word.

What is the physical form of HV046JJ?

HV046JJ is a liquid with light yellow color. It has oily odor.

What is HV046JJ used for?

Hydraulic oil.