NextSDS Logo
Safety Data Sheet EN

MOTOR OIL 5W30 DEX1 G2

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MOTOR OIL 5W30 DEX1 G2
Product Form
Mixture
Product Code
TJQ

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Engine oil.

Manufacturers & Suppliers

T

TOTAL LUBRIFIANTS

manufacturer

562 Avenue du Parc de L'ile 92029 Nanterre Cedex FRANCE

+33 (0)1 41 35 40 00

Emergency Contacts

Emergency Contact

+44 1235 239670

France - ORFILA (INRS)

+33 (0)1 45 42 59 59

ANGERS

02 41 48 21 21

BORDEAUX

05 56 96 40 80

LILLE

08 00 59 59 59

LYON

04 72 11 69 11

MARSEILLE

04 91 75 25 25

NANCY

03 83 22 50 50

PARIS

01 40 05 48 48

STRASBOURG

03 88 37 37 37

TOULOUSE

05 61 77 74 47

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Distillates (petroleum), hydrotreated heavy paraffinic EC: 265-157-1 64742-54-7 40 - 50% Yes
Distillates (petroleum), solvent-dewaxed heavy paraffinic EC: 265-169-7 64742-65-0 5 - 10% Yes
zinc O,O,O',O'-tetrakis(1,3-dimethylbutyl) bis(phosphorodithioate) EC: 218-679-9 2215-35-2 1 - 2.5% Yes
bis(nonylphenyl)amine EC: 253-249-4 36878-20-3 1 - 2.5% Yes
tris(branched-alkyl) borate --- 0.1 - 1% Yes

Product containing mineral oil with less than 3% DMSO extract as measured by IP 346.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove casualty to fresh air and keep at rest in a position comfortable for breathing. If not breathing, give artificial respiration.

Symptoms: Based on available data, the classification criteria are not met. Inhalation of vapors in high concentration may cause irritation of respiratory system.

Skin contact

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Wash contaminated clothing before reuse.

Symptoms: Based on available data, the classification criteria are not met. May produce an allergic reaction.

Eye contact

Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Keep eye wide open while rinsing.

Symptoms: Based on available data, the classification criteria are not met. The supplier of one or more of the components contained within this formulation has indicated that he has data on the components and/or similar mixtures, which confirms that at the concentration used, classification is not required.

Ingestion

Clean mouth with water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Call a physician or Poison Control Center immediately.

Symptoms: Based on available data, the classification criteria are not met. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide (CO 2). ABC powder. Foam. Water spray or fog.

Unsuitable media

Do not use a solid water stream as it may scatter and spread fire.

Specific hazards

Incomplete combustion and thermolysis may produce gases of varying toxicity such as carbon monoxide, carbon dioxide, various hydrocarbons, aldehydes and soot. These may be highly dangerous if inhaled in confined spaces or at high concentration.

Firefighter Protection

Wear self-contained breathing apparatus and protective suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not touch or walk through spilled material. Contaminated surfaces will be extremely slippery. Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition.

Large spill

Dike to collect large liquid spills.

Environmental

Do not allow material to contaminate ground water system. Prevent entry into waterways, sewers, basements or confined areas.

Cleanup methods

Dispose of contents/container in accordance with local regulation. In case of soil contamination, remove contaminated soil for remediation or disposal, in accordance with local regulations.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only in well-ventilated areas. Do not breathe vapors or spray mist. Avoid contact with skin, eyes and clothing.

Storage

Store at room temperature. Keep container tightly closed. Keep preferably in the original container.

Hygiene

Ensure the application of strict rules of hygiene by the personnel exposed to the risk of contact with the product. When using, do not eat, drink or smoke. Wash hands before breaks and immediately after handling the product. Regular cleaning of equipment, work area and clothing is recommended. Do not use abrasives, solvents or fuels. Do not dry hands with rags that have been contaminated with product. Do not put product contaminated rags into workwear pockets.

Fire prevention

Take precautionary measures against static discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
limpid
Colour
yellow
Colour Intensity
---
Form
---
Odor
Characteristic
Odor Threshold
No information available
Ph
Not applicable
Melting Point
Not applicable
Boiling Point
No information available
Flash Point
ASTM D 92: 226 °C
Freezing Point
No information available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No information available
Vapor Pressure
No information available
Vapor Density
No information available
Relative Density
0.850 @ 15 °C
Bulk Density
---
Density
850 kg/m³ @ 15 °C
Flammability
---
Upper Explosive Limit
No information available
Lower Explosive Limit
No information available
Explosive Limits
---
Auto Ignition Temperature
No information available
Decomposition Temperature
No information available
Solubility
---
Partition Coefficient
No information available
Solubility In Water
Insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
62 mm2/s @ 40 °C
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

None under normal processing.

Hazardous reactions

No dangerous reaction known under conditions of normal use.

Avoid

Keep away from open flames, hot surfaces and sources of ignition. Keep away from heat and sparks.

Incompatible

Strong oxidizing agents.

Decomposition

Incomplete combustion and thermolysis may produce gases of varying toxicity such as carbon monoxide, carbon dioxide, various hydrocarbons, aldehydes and soot. Combustion products include sulphur oxides ( SO2 and SO3 ) and Hydrogen sulphide H2S, Mercaptans, Nitrogen oxides (NOx), Phosphorous oxides, Zinc oxides.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Based on available data, the classification criteria are not met. Acute aquatic toxicity - Product Information No information available. Acute aquatic toxicity - Component Information |Chemical Name|Toxicity to algae|Toxicity to daphnia and other aquatic invertebrates|Toxicity to fish|Toxicity to microorganisms|

Based on available data, the classification criteria are not met.

12.1 Toxicity

Acute aquatic toxicity - Component Information: Distillates (petroleum), hydrotreated heavy paraffinic (64742-54-7): EL50 (48h) > 100 mg/l (Pseudokirchnerella subcapitata - OECD 201); EL50 (48h) > 10000 mg/l (Daphnia magna - OECD 202); LL50 (96h) > 100 mg/l (Oncorhynchus mykiss - OECD 203)

12.1 Toxicity

Distillates (petroleum), solvent-dewaxed heavy paraffinic (CAS 64742-65-0): EL50 (48h) > 10000 mg/l (Daphnia magna - OECD 202); LL50 (96h) > 100 mg/l (Oncorhynchus mykiss - OECD 203)

12.1 Toxicity

Acute aquatic toxicity - Component Information: zinc O,O,O',O'-tetrakis(1,3-dimethylbutyl)bis(phosphorodithioate) (2215-35-2): Toxicity to algae: EL50 (72h) 21 mg/l (Desmodesmus subspicatus - Static - OECD 201); Toxicity to daphnia and other aquatic invertebrates: EL50 (48h) 23 mg/l (Daphnia magna - static - OECD 202); Toxicity to fish: LL50 (96h) 4.5 mg/l (Oncorhynchus mykiss - semi static - OECD 203).

12.1 Toxicity

Acute aquatic toxicity - Component Information: bis(nonylphenyl)amine | EC50(72h) 600 mg/l | EC50(48h) > 100 mg/l | LC50(96h) > 100 mg/l | EC50(0.1 d) > 1,000 mg/l

12.1 Toxicity

Acute aquatic toxicity - Component Information Chemical Name: tris(branched-alkyl) borate Toxicity to algae: EC50(72h) 21 mg/l (Green algae-Selenastrum capricornutum) Toxicity to daphnia and other aquatic invertebrates: EC50(48h) 5.7 mg/l (Daphnia magna) Toxicity to fish: LC50(96h) 6.4 mg/l

Chronic aquatic toxicity - Component Information

Distillates (petroleum), hydrotreated heavy paraffinic 64742-54-7: NOEL (21d) 10 mg/l (Daphnia magna - QSAR Petrotox); NOEL (14/28d) > 1000 mg/l (Oncorhynchus mykiss - QSAR Petrotox)

12.1 Toxicity

Chronic aquatic toxicity - Component Information Chemical Name | Toxicity to algae | Toxicity to daphnia and other aquatic invertebrates | Toxicity to fish | Toxicity to microorganisms Distillates (petroleum), solvent-dewaxed heavy paraffinic 64742-65-0 | | NOEL (21d) 10 mg/l (Daphnia magna - OECD 211) | NOEL (14/28d) > 1000 mg/l (Oncorhynchus mykiss - QSAR Petrotox) |

Chronic aquatic toxicity - Component Information

zinc O,O,O',O'-tetrakis(1,3-dimethylbutyl)bis(phosphorodithioate) 2215-35-2 NOEC (21d) 0.4 mg/l (Daphnia magna - OECD 211)

Chronic aquatic toxicity - Component Information

Chronic aquatic toxicity - Component Information: tris(branched-alkyl) borate: NOEC(21d) 1.9 mg/l (DaphniaMagna)

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.3. Bioaccumulative potential

|Chemical Name|log Pow| |Distillates (petroleum),hydrotreatedheavy paraffinic-64742-54-7|-|

12.3. Bioaccumulative potential

|Chemical Name|log Pow| |zinc O,O,O',O'-tetrakis(1,3-dimethylbutyl) bis(phosphorodithioate) - 2215-35-2|2.21|

12.3. Bioaccumulative potential

|**Chemical Name**|**log Pow**| |bis(nonylphenyl)amine-36878-20-3|7.7|

12.4. Mobility in soil

Soil Given its physical and chemical characteristics, the product generally shows low soil mobility. Air Loss by evaporation is limited. Water The product is insoluble and floats on water.

The product generally shows low soil mobility, limited evaporation, and is insoluble in water.

12.5. Results of PBT and vPvB assessment

PBT and vPvB assessment No information available.

12.6. Other adverse effects

General Information No information available.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Should not be released into the environment. Dispose of in accordance with the European Directives on waste and hazardous waste. Where possible recycling is preferred to disposal or incineration. After use, this oil must be sent to a licensed waste oil facility. Incorrect disposal of used oil poses a risk to the environment. Mixture with other waste types such as solvents, brake- and cooling liquids is forbidden.

Disposal

After use, this oil must be sent to a licensed waste oil facility.

Waste Codes

13 02 05 Waste codes are not product specific, but application specific. The following Waste Codes are only suggestions. EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

All substances contained in this mixture have been pre-registered, registered or are exempt from registration in accordance with Regulation (CE) No. 1907/2006 (REACh)

Chemical Safety Assessment Not performed

No information available

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MOTOR OIL 5W30 DEX1 G2?

The signal word is no signal word.

What is the physical form of MOTOR OIL 5W30 DEX1 G2?

MOTOR OIL 5W30 DEX1 G2 is a liquid appearing as limpid with yellow color. It has characteristic odor.

What is MOTOR OIL 5W30 DEX1 G2 used for?

Engine oil.

What is the melting point of MOTOR OIL 5W30 DEX1 G2?

The melting point is Not applicable and the boiling point is No information available.