Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Fatty acids, C16-18 and C18-unsatd., Me esters
- Chemical Name
- Fatty acids, C16-18 and C18-unsatd., Me esters
Regulatory Identifiers
- CAS Number
- 67762-38-3 Check regulations →
- EC Number
- 267-015-4 Check regulations →
- REACH No.
- 01-2119471664-32-0021
Identified Uses
Use of Biodiesel Formulation for Gasoil production Use of Gasoil
Uses advised against
The substance is not classified as hazardous under Regulation on Classification, Labelling and Packaging (CLP) EC 1272/2008, therefore there are not uses advised against.
Manufacturers & Suppliers
PREOL a.s.
manufacturer
Terezínská 1214, 410 02 Lovosice, Czech Republic
+420 416 564 830
Emergency Contacts
Toxicological Information Centre (TIC – Czech Republic)
+420 224 91 92 93
24h
Toxicological Information Centre (TIC – Czech Republic)
+420 224 91 54 02
24h
Toxicological Information Centre (TIC – Czech Republic)
+420 224 91 45 75
24h
Toxicological Information Centre (TIC – Czech Republic)
+420 224 97 11 11
24h
Transport Information and Emergency System (TRINS – Czech Republic)
+420 476709826
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
EC name: Fatty acids, C16-18 and C18-unsatd., Me esters; EC number: 267-015-4; CAS number (EC inventory): 67762-38-3
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fatty acids, C16-18 and C18-unsatd., Me esters EC: 267-015-4 | 67762-38-3 | --- | No |
This substance is identified by SDA Substance Name: C16-C18 and C18 unsaturated alkyl carboxylic acid methyl ester and SDA Reporting Number: 11-010-00. The following other substances may fall within the same description: Fatty acids, rape oil, Me esters - EINECS 287-828-8 - CAS 85586-25-0 Soybean oil, Me esters - EINECS 267-055-2 - CAS 67784-80-9 Fatty acids, soya, Me esters - EINECS 272-898-4 - CAS 68919-53-9 Fatty acids, sunflower-oil, Me esters - EINECS 272-900-3 - CAS 68919-54-0 Fatty acids, palm-oil, Me esters - EINECS 293-086-6 - CAS 91051-34-2. The substance is synthesized by transesterification of natural oils with methanol to produce methylesters and glycerin. In this description enter all substances generated by natural oils with fatty acid chains lengths focused on C16, C18 and C18 unsatd. above 2%. Examples of such raw materials are rapeseed oil, soya oil, soybean oil, sunflower oil, palm oil and all analogous derivatives. Molecular formula: UVCB substance, not univocal molecular formula available. Molecular weight range: ca. 296.0
Notes
CAS name: UVCB substance, for CAS name information it is possible to refer to the different composition substances. IUPAC name: UVCB substance, no IUPAC name available.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty from exposure ensuring one's own safety whilst doing so; seek medical attention if symptoms persist.
Symptoms: Vapors produced by heating, or finely misted materials may irritate the mucous membranes and cause dizziness, and nausea.
Wash immediately with plenty of soap and water. Remove all contaminated clothes and footwear immediately unless stuck to skin.
Symptoms: Thermal burns are possible on contact with material at elevated temperatures.
Irrigate eyes with a heavy stream of water for at least 15 to 20 minutes
Symptoms: Minor eye irritation possible.
Do not induce vomiting. Wash out mouth with water. If conscious, give half a liter of water to drink immediately. If gastro-intestinal symptoms develop, consult medical personnel. (Never give anything by mouth to an unconscious person)
Immediate Medical Attention
Not relevant for this substance.
Medical Treatment
Not relevant for this substance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical powder, alcohol resistant foam, halon (may not be permissible in some countries), CO₂, water spray (fog).
Water stream may splash the burning liquid and spread fire
In combustion emits toxic fumes of carbon dioxide / carbon monoxide.
Fire-fighters should use self-contained breathing apparatus to avoid exposure to smoke and vapour. Wear protective clothing to prevent contact with skin and eyes.
Firefighter Protection
Fire-fighters should use self-contained breathing apparatus to avoid exposure to smoke and vapour. Wear protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent contamination of clothes and shoes; avoid contact with the skin and eyes. Eliminate all sources of ignition. If outside do not approach from downwind. Evacuate all personnel who do not take part in the cleaning/emergency procedure. Mark out the contaminated area with signs and prevent access to unauthorised personnel.
Pick up small spills with absorbent materials and dispose of properly to avoid spontaneous combustion.
Recover large spills for appropriate treatment and reutilization or for disposal according to legislation.
Prevent any leakage. Do not discharge into communal sewerage, drains or waters.
Wash hard surfaces with safety solvent or detergent to remove remaining oil film.
Materials: absorbent materials, safety solvent or detergent
Related Products
Similar products with comparable safety profiles
Fatty acids, C10-18 and C12-22-unsatd., C14-18 and C16-18-unsatd. alkyl esters
CAS: 85049-31-6
Fatty acids, complex esters
---
Fatty acids, mixed, alkyl esters
---
Fatty acids, mixed, alkyl esters
---
Fatty acids and fatty esters, mixed
---
Fatty acids esters
---
Fatty acids, mixed, complex ester
---
Fatty esters
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid direct contact with the substance. Minimize exposure of workers during and after normal operations by the use of good industrial hygiene practice for handling chemical substances and mixtures.
Store in cool, well ventilated area. Keep away from sources of ignition, excessive heat and oxidizing agents. Keep container tightly closed. Storage life, ~2 years. Protect from frost. Protect against static electricity. Store at +15°C to +25°C.
Do not eat, drink or smoke in work areas; wash hands after use; and remove contaminated clothing and protective equipment before entering eating areas.
Keep away from sources of ignition, excessive heat
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No relevant engineering controls.
PVC coated gloves recommended to prevent skin contact.
Safety glasses, goggles, or face shield recommended to protect eyes from mists or splashing.
If vapours or mists are generated, wear a NIOSH approved organic vapour/mist respirator.
Prevent product from entering sewerages. Is not allowed to pour any amount of the product to the sewerage or water pipes. See also 6.2
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The substance is stable under normal ambient and hazardous reaction will not occur under appropriate handling and storage.
This product is stable and hazardous reaction will not occur under appropriate handling and storage.
hazardous reaction will not occur under appropriate handling and storage.
excessive heat, ignition sources, frost
oxidizing agents
Combustion produces carbon monoxide, carbon dioxide along with thick smoke.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Unusable product residues usually are disposed of by combustion in incinerators. Due to biodegradability, contaminated absorbent material may be stored on approved landfills.
Unusable product residues usually are disposed of by combustion in incinerators.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Fatty acids, C16-18 and C18-unsatd., Me esters?
The signal word is no signal word.
What is the physical form of Fatty acids, C16-18 and C18-unsatd., Me esters?
Fatty acids, C16-18 and C18-unsatd., Me esters is a liquid appearing as green/yellow liquid oil . It has mild odor.
What is the solubility of Fatty acids, C16-18 and C18-unsatd., Me esters?
< 0,023 mg/l Instrumental detection limit
What is Fatty acids, C16-18 and C18-unsatd., Me esters used for?
Use of Biodiesel Formulation for Gasoil production Use of Gasoil
What is the melting point of Fatty acids, C16-18 and C18-unsatd., Me esters?
The melting point is 6.29°C at 1 atm The range of melting temperature goes from -16.92°C to +15.59°C. and the boiling point is 354.3°C at 1 atm.