Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Diethylenglykol
- Chemical Name
- Diethylenglykol
Regulatory Identifiers
- CAS Number
- 111-46-6 Check regulations →
- EC Number
- 203-872-2 Check regulations →
- REACH No.
- 01-2119457857-21-0111
Identified Uses
Industrial use Cooling agent Anti-freezing agent Laboratory chemicals Intermediate
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
HVL GmbH
manufacturer
79410 Badenweiler Germany
+49-7632-823481
Emergency Contacts
Vergiftungs-Informations-Zentrale Freiburg
+49 (0) 761 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2,2'-oxybisethanol EC: 203-872-2 | 111-46-6 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air.
Rinse opened eye for several minutes under running water. Remove contact lenses, if present and easy to do. Continue rinsing.
Rinse out mouth and then drink plenty of water. If symptoms persist consult doctor. Do NOT induce vomiting.
Immediate Medical Attention
If symptoms persist consult doctor.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
Water with full jet
Formation of toxic gases is possible during heating or in case of fire.
Cool endangered receptacles with water spray.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Dilute with plenty of water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Ethylene glycol diethyl ether
CAS: 629-14-1
Diethylene glycol diethyl ether
CAS: 112-36-7
Monoethylenglykol (MEG)
CAS: 107-21-1
Monoethylenglykol (MEG)
CAS: 107-21-1
Monoethylenglykol (MEG)
CAS: 107-21-1
Ethyldiglycol (EDG)
CAS: 111-90-0
Ethyl di glycol
CAS: 111-90-0
Diethylene glycol monoethyl ether
CAS: 111-90-0
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly.
Store in cool, dry conditions in well sealed receptacles.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. Only use chemical-protective gloves with CE-labelling of category III. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. DIN EN 374. Material of gloves: Butyl rubber, BR (0.6 - 0.8 mm) Fluorocarbon rubber (Viton). The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material: ≥ 480 min. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles. Gauze goggles EN 166
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used and stored according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must be specially treated adhering to official regulations.
Must be specially treated adhering to official regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Diethylenglykol?
The signal word is warning.
What is the physical form of Diethylenglykol?
Diethylenglykol is a fluid appearing as fluid with colourless color. It has nearly odourless odor.
What is Diethylenglykol used for?
Industrial use Cooling agent Anti-freezing agent Laboratory chemicals Intermediate
What are the hazard statements for Diethylenglykol?
This substance has 1 hazard statement:
- H302: Harmful if swallowed.
What is the melting point of Diethylenglykol?
The melting point is -6.5 °C and the boiling point is 244.9 °C.