aramcoULTRA 2 (Base Oil 60 Neutral)

In case of symptoms arising from inhalation of fumes, mists or vapour: Remove casualty to a quiet and well ventilated place if safe to do so. If the casualty is unconscious and: - Not breathing – ensure that there is no obstruction to breathing and give artificial respiration by trained personnel. If necessary, give external cardiac massage and obtain medical assistance.- Breathing: place in recovery position. Administer oxygen if necessary. Obtain medical assistance if breathing remains difficult.

Remove contaminated clothing and footwear, and dispose of safely. Wash affected area with soap and water. Seek medical attention if skin irritation, swelling or redness develops and persists. (if applicable) When using high-pressure equipment, injection of product can occur. If high-pressure injuries occur, immediately seek professional medical attention. Do not wait for symptoms to develop. For minor thermal burns: Cool the burn. Hold the burned area under cold running water for at least five minutes, or until the pain subsides. However, body hypothermia must be avoided. Do not put ice on the burn; Remove non-sticking garments carefully. DO NOT attempt to remove portions of clothing glued to burnt skin but cut round them. Seek medical attention in all cases of serious burns

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do so. Continue rinsing. If irritation, blurred vision or swelling occurs and persists, obtain medical attention. If hot product is splashed into the eye, it should be cooled immediately to dissipate heat, under cold running water. Immediately obtain specialist medical assessment and treatment for the casualty.

Always assume that aspiration has occurred. Seek professional medical attention or send the casualty to a hospital. Do not wait for symptoms to develop. Do not induce vomiting as there is a risk of aspiration. Do not give anything by mouth to an unconscious person. If vomiting occurs, the head should be kept low so that the vomit does not enter the lungs (aspiration). Once vomiting ceases, place the person in the recovery position with the legs slightly raised.

Foam (Specifically trained personnel only), Water fog (Specifically trained personnel only), Dry chemical powder, Carbon dioxide, Other inert gases (subject to regulations), Sand or earth

Do not use direct water jets on the burning product; they could cause splattering and spread the fire. Simultaneous use of foam and water on the same surface is to be avoided as water destroys the foam.

Use water SPRAY only to cool containers. Do not put water on leaked material.

Keep non-involved personnel away from the area of spillage. Alert emergency personnel. Except in case of small spillages, the feasibility of any actions should always be assessed and advised, if possible, by a trained, competent person in charge of managing the emergency. Stop or contain leak at the source if safe to do so. Avoid direct contact with released material. Stay upwind.

Normal antistatic working clothes.

Full body suit of chemically resistant and antistatic material.

Prevent product from entering sewers, rivers, waterways or other bodies of water

Collect free product with suitable means. Transfer collected product and other contaminated materials to suitable tanks or containers for recycle, recovery or safe disposal. Collect recovered product and other contaminated materials in suitable tanks or containers for recovery or safe disposal.

Materials: suitable tanks or containers

Obtain special instructions before use. Keep away from sparks/open flames/hot surfaces. – No smoking. Use and store only outdoors or in a well-ventilated area. Avoid contact with the product. Avoid release to the environment. Take precautionary measures against static electricity. Avoid splash filling of bulk volumes when handling hot liquid product. Avoid contact with skin. Avoid breathing fume/mist. Do not ingest. Prevent the risk of slipping. Ensure that proper housekeeping measures are in place. Contaminated materials should not be allowed to accumulate in the workplaces and should never be kept inside the pockets.

Keep containers tightly closed and properly labelled. Store away from water and sewer.

Keep away from food and beverages. Do not eat, drink or smoke when using this product. Wash the hands thoroughly after handling. Use personal protective equipment as required. Change contaminated clothes at the end of working shift.

Keep away from sparks/open flames/hot surfaces. – No smoking. Take precautionary measures against static electricity.

Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits.

Work gloves providing adequate chemical resistance, specifically to aromatic hydrocarbons. Note: gloves made of PVA are not water-resistant, and are not suitable for emergency use. Chemical resistant gloves required for prolonged or repeated contact.

Goggles or face shield, if splashes or contact with eyes is possible or anticipated.

Respiratory protection will be necessary only in special cases (e.g. formation of mists). A half or full-face respirator with combined dust/organic vapour filter(s), or a Self-Contained Breathing Apparatus (SCBA) can be used according to the extent of spill and predictable amount of exposure. If the situation cannot be completely assessed, or if an oxygen deficiency is possible, only SCBA's should be used. In case of inadequate ventilation use suitable respirator. Wear mask supplied with: Gas cartridge suitable for organic substances.

Work helmet. Antistatic non-skid safety shoes or boots.

Ensure not to cause environmental pollution by discharging into rivers or other waterways.

Stable under normal temperature conditions and recommended use.

No specific reactivity hazards associated with this product.

Hazardous Polymerization will not occur.

Avoid exposing to heat and contact with strong oxidising substances.

strong oxidising substances

Carbon monoxide (CO), Carbon dioxide (CO₂), Aldehydes, Ketones, Sulphurous gases (SOx)

Waste must be disposed of in accordance with federal, state and local environmental control regulations.

Consider the required attentions in accordance with waste treatment management regulation.