Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TECKNO A1299
- Chemical Name
- Lauryl Alcohol
Regulatory Identifiers
- CAS Number
- 112-53-8 Check regulations →
Identified Uses
Production of alkyl amines, aluminum rolling lubricants, tertiary amines, cosmetics, ethoxylates, halides/mercaptans, polymerization stabilizers, and sulfation.
Uses advised against
No additional information available
Manufacturers & Suppliers
Teck Guan (China) Ltd.
manufacturer
No 1 Teck Guan Road, Rugao Port, Jiangsu, China 226532
+86-513-8758 5000
http://www.teckguan.com/cn
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing.
Rinse skin with plenty of water / Shower.
Rinse with a lot of water at lease 15 minutes.
Never give an unconscious person anything by mouth. Rinse mouth. If ingestion of a large amount does occur, call a poison control center immediately.
Immediate Medical Attention
Get medical attention if irritation develops or persists. Call a poison control center immediately if ingestion of a large amount occurs.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water. Water fog. Foam. Dry chemical powder. Carbon dioxide（CO2）.
On burning: Release of (carbon monoxide - carbon dioxide)
In the event of fire, cool tanks with water spray. Use water spray to cool unopened containers. Cool containers exposed to flames with water until well after the fire is out.
Firefighter Protection
In the event of fire, cool tanks with water spray. Use water spray to cool unopened containers. Cool containers exposed to flames with water until well after the fire is out.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use proper Personal protective equipment to avoid the inhalation of vapor, fog or gas.
Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination. Following product recovery, flush area with water.
Prevent product from entering drains. Do not allow material to contaminate ground water system. Dike for ahead of spill for later disposal. Use a non-combustible material like vermiculite, sand or earth to soak up the product and place into a container for later disposal.
Prevent further leakage or spillage if safe to do so. Do not contaminate water.
Collect spillage. Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination. Following product recovery, flush area with water.
Materials: non-combustible material like vermiculite, sand or earth, absorbent material (e.g. cloth, fleece)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not get this material in contact with eyes. When using, don’t eat or drink or smoke. Wash hands thoroughly after handling.
Use care in handling / storage.
When using, don’t eat or drink or smoke. Wash hands thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No hazards to be especially mentioned.
No additional information available
Hazardous polymerization does not occur.
Not available
Strong oxidizing agents
Complete combustion forms carbon dioxide and water vapor. Partial combustion forms also carbon monoxide, soot, aldehydes and ketones.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Ecotoxicological data
The product contains components hazardous to aquatic life and is classified as very toxic to aquatic organisms.
12.1. Ecotoxicological data
Persistence and degradability data are not established.
12.1. Ecotoxicological data
Bioaccumulation data are not established.
12.1. Ecotoxicological data
Mobility data are not established.
12.1. Ecotoxicological data
Other adverse effects are not established.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S (1-Dodecanol)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
All components of this product comply with the inventory requirements administered by the governing country(s).
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TECKNO A1299?
The signal word is warning.
What is the physical form of TECKNO A1299?
TECKNO A1299 is a solid appearing as solid @ 72°f ( 22°c ) with white to pale yellow color. It has fresh, waxy odor.
What is TECKNO A1299 used for?
Production of alkyl amines, aluminum rolling lubricants, tertiary amines, cosmetics, ethoxylates, halides/mercaptans, polymerization stabilizers, and sulfation.
What are the hazard statements for TECKNO A1299?
This substance has 1 hazard statement:
- H410: Very toxic to aquatic life
What is the melting point of TECKNO A1299?
The melting point is 24°C ( 75.2°F ) and the boiling point is 498°F (259°C) @ 760 mmHg (101.3kPa).