Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- i-Nonanoic acid
- Chemical Name
- 3,5,5-Trimethylhexanoic acid
Regulatory Identifiers
- CAS Number
- 3302-10-1 Check regulations →
- REACH No.
- 01-2119517580-45-0001
Identified Uses
Chemical used in synthesis and/or formulation of industrial products
Manufacturers & Suppliers
BASF SE
manufacturer
67056 Ludwigshafen, GERMANY
BASF plc
national supplier
PO Box 4, Earl Road, Cheadle Hulme, Cheadle, Cheshire, SK8 6QG, UNITED KINGDOM
+44 161 485-6222
Emergency Contacts
Emergency Contact
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 3,5,5-Trimethylhexanoic acid EC: 221-975-0 | 3302-10-1 | 95 - 99% | Yes |
| Isononanoic acid EC: 248-092-3 | 26896-18-4 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Keep patient calm, remove to fresh air, seek medical attention.
Remove contaminated clothing. Wash thoroughly with soap and water.
Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
Immediate Medical Attention
Seek medical attention if inhaled, ingested, or in case of eye contact.
Medical Treatment
Treat according to symptoms (decontamination, vital functions)
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
dry powder, foam, carbon dioxide, water jet
nitrogen oxides, carbon oxides. The substances/groups of substances mentioned can be released in case of fire.
Firefighter Protection
Wear self-contained breathing apparatus and chemical-protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation. Avoid contact with the skin, eyes and clothing.
Pick up with suitable absorbent material (e.g. sand, sawdust, general-purpose binder, kieselguhr).
Pump off product.
Do not empty into drains.
Pump off product (large amounts); Pick up with suitable absorbent material (residues).
Materials: sand, sawdust, general-purpose binder, kieselguhr
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should be kept handy.
Keep container tightly closed in a cool, well-ventilated place.
Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should be kept handy.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant protective gloves (EN 374) Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374): fluoroelastomer (FKM) - 0.7 mm coating thickness butyl rubber (butyl) - 0.7 mm coating thickness polyvinylchloride (PVC) - 0.7 mm coating thickness nitrile rubber (NBR) - 0.4 mm coating thickness chloroprene rubber (CR) - 0.5 mm coating thickness Suitable materials for short-term contact (recommended: At least protective index 2, corresponding > 30 minutes of permeation time according to EN 374) natural rubber/natural latex (NR) - 0.5 mm coating thickness Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing. Manufacturer's directions for use should be observed because of great diversity of types.
Tightly fitting safety goggles (splash goggles) (e.g. EN 166)
Respiratory protection in case of vapour/aerosol release. Suitable respiratory protection for higher concentrations or long-term effect: Combination filter for gases/vapours of organic compounds and solid and liquid particles (f.e. EN 14387 Type A-P2)
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
For information regarding environmental exposure controls, see Section 6.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable if stored and handled as prescribed/indicated.
No hazardous reactions if stored and handled as prescribed/indicated. Corrosion to metals: No corrosive effect on metal.
Reacts with strong alkalies. Exothermic reaction.
See MSDS section 7 - Handling and storage.
strong alkalies
No hazardous decomposition products if stored and handled as prescribed/indicated.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Acutely harmful for aquatic organisms. No inhibition of activated sludge degradation activity expected at low concentrations.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Endocrine disrupting properties
12.7. Other adverse effects
12.1. Toxicity
12.2. Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The product does not fulfill the criteria for PBT (Persistent/bioaccumulative/toxic) and vPvB (very persistent/very bioaccumulative).
12.6. Other adverse effects
The substance is not listed in Regulation (EC) 1005/2009 on substances that deplete the ozone layer.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Incinerate in suitable incineration plant, observing local authority regulations.
This product and any uncleaned containers must be disposed of as hazardous waste in accordance with the 2005 Hazardous Waste Regulations and amendments (United Kingdom)
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data should be considered when making any assessment under the Control of Substances Hazardous to Health Regulations (COSHH), and related guidance, for example, 'COSHH Essentials' (United Kingdom).
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for i-Nonanoic acid?
The signal word is danger.
What is the physical form of i-Nonanoic acid?
i-Nonanoic acid is a liquid appearing as colourless with colourless color. It has faint odour odor.
What is i-Nonanoic acid used for?
Chemical used in synthesis and/or formulation of industrial products
What are the hazard statements for i-Nonanoic acid?
This substance has 3 hazard statements:
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
What is the melting point of i-Nonanoic acid?
The melting point is < -60 °C Literature data. and the boiling point is 230 - 240 °C (1,013 hPa) Literature data..