Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CitriSurf® 2210
- Product Code
- 8730004223
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
passivation
Manufacturers & Suppliers
MKK GmbH
manufacturer
Karl Bunje Str. 36, 26129 Oldenburg
+49 (0) 441 5948 277
Emergency Contacts
Poison Information Centre Goettingen
+49 551 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air.
Wash off immediately with soap and water.
In case of contact with the eyes rinse thoroughly with plenty of water or with an eye-cleaning solution.
Rinse out mouth and give plenty of water to drink.
Immediate Medical Attention
In the event of symptoms take medical treatment. Seek medical advice immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, Dry powder, Water spray jet
If a fire breaks out nearby, pressure build-up and danger of bursting are possible.
Cool endangered containers with water spray jet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
High risk of slipping due to leakage/spillage of product.
Do not allow to enter drains or waterways.
Take up with absorbent material
Materials: sand, kieselguhr, universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe the usual precautions for handling chemicals.
Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant gloves. Appropriate Material nitrile. Material thickness >= 0,6 mm. Breakthrough time > 480 min. Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leaktightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Tightly fitting safety glasses
Not necessary.
Clothing as usual in the chemical industry.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable.
No hazardous reactions when stored and handled according to prescribed instructions.
Under normal conditions of storage and use, hazardous reactions will not occur.
Protect from heat and direct sunlight.
None known
No hazardous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The product contains no PBT substances. The product contains no vPvB substances.
12.6 Endocrine disrupting properties
The product does not contain a substance that has endocrine disrupting properties with respect to non-target organisms.
12.7. Other adverse effects
No ecotoxicological data available for the product.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Allocation of a waste code number, according to the European Waste Catalogue (EWC), should be carried out in agreement with the regional waste disposal company.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Ensure that persons transporting the product know what to do in the event of an accident or spillage.
Ensure that persons transporting the product know what to do in the event of an accident or spillage.
Ensure that persons transporting the product know what to do in the event of an accident or spillage.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Ingredients (Regulation (EC) No 648/2004)
The product does not contain substances according to: Candidate List for inclusion in Annex XIV of Regulation (EC) No. 1907/2006 (REACH).
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CitriSurf® 2210?
The signal word is warning.
What is the physical form of CitriSurf® 2210?
CitriSurf® 2210 is a gel appearing as white opaque with white opaque color. It has characteristic odor.
What is the solubility of CitriSurf® 2210?
not determined
What is CitriSurf® 2210 used for?
passivation
What are the hazard statements for CitriSurf® 2210?
This substance has 1 hazard statement:
- H317: May cause an allergic skin reaction.
What is the melting point of CitriSurf® 2210?
The melting point is appr. 0 °C and the boiling point is appr. 100 °C.