Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- edding Chalk Marker Ink (black) contained in: edding 4085
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Ink for use in felt pens
Uses advised against
No data available.
Manufacturers & Suppliers
edding International GmbH
manufacturer
Bookkoppel 7, D-22926 Ahrensburg
+49 (0) 41 02 / 80 8-0
Emergency Contacts
Giftnotruf Berlin
+49 (0)30 30686 790
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-octyl-2H-isothiazol-3-one EC: 247-761-7 | 26530-20-1 | 0.1% | Yes |
| CARBON BLACK EC: 215-609-9 | 1333-86-4 | 5 - 10% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air.
Wash immediately with plenty of water for several minutes.
Remove contact lenses. Rinse eye thoroughly under running water keeping eyelids wide open and protecting the unaffected eye (at least 10 to 15 minutes). Seek medical assistance.
Rinse the mouth thoroughly with water. Call a doctor immediately. Never give anything by mouth to an unconscious person.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguishing powder; Foam; Water spray jet
High power water jet
In the event of fire, the following can be released: Carbon monoxide (CO); Carbon dioxide (CO2)
Firefighter Protection
Use self-contained breathing apparatus. Wear protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: Refer to protective measures listed in sections 7 and 8. Avoid contact with skin, eyes and clothing. For emergency responders: No data available.
Do not discharge into the drains/surface waters/groundwater. Do not discharge into the subsoil/soil.
Take up with absorbent material
Materials: sand, kieselguhr, universal binder
Related Products
Similar products with comparable safety profiles
edding Paint Marker-Ink (black) contained in: edding 750, edding 751, edding 755, edding 780
---
edding permanent ink (black) contained in: edding 400
---
edding Paint Marker-Ink (white) contained in: edding 750, edding 751, edding 755, edding 780
---
edding Paint Marker-Ink (green) contained in: edding 750, edding 751, edding 780
---
edding Paint Marker-Ink (yellow)
---
edding Permanent Marker Refill Ink T25, T100, T1000, MTK25 (black) contained in: edding 3000
---
edding 8200 grout marker, white
---
edding Permanent Marker Refill Ink T25, T100, T1000 (blue) contained in: edding 800
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide good ventilation at the work area (local exhaust ventilation, if necessary). Observe the usual precautions for handling chemicals.
Keep container tightly closed and dry in a cool, well-ventilated place. Store product in closed containers.
Do not eat, drink or smoke during work time. Keep away from foodstuffs and beverages. Avoid contact with eyes and skin. Remove soiled or soaked clothing immediately. Wash hands before breaks and after work.
No special measures necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No data available.
Sufficient protection is given wearing suitable protective gloves checked according to i.e. EN 374, in the event of risk of skin contact with the product. Before use, the protective gloves should be tested in any case for its specific workstation suitability (i.e. mechanical resistance, product compatibility and antistatic properties). Adhere to the manufacturer's instructions and information relating to the use, storage, care and replacement of protective gloves. Protective gloves shall be replaced immediately when physically damaged or worn. Design operations thus to avoid permanent use of protective gloves.
Safety glasses (EN 166)
If workplace exposure limits are exceeded, a respiration protection approved for this particular job must be worn. In case of aerosol and mist formation, take appropriate measures for breathing protection in the event workplace threshold values are not specified.
Normal chemical work clothing.
No data available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage and handling conditions (See section 7).
No data available.
No data available.
No data available.
No data available.
No hazardous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No data available for toxicity to fish, Daphnia, algae, or bacteria.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Allocation of a waste code number, according to the European Waste Catalogue, should be carried out in agreement with the regional waste disposal company.
Allocation of a waste code number, according to the European Waste Catalogue, should be carried out in agreement with the regional waste disposal company.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is subject to REACH regulation (EC) 1907/2006 annex XVII.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for edding Chalk Marker Ink (black) contained in: edding 4085?
The signal word is warning.
What is the physical form of edding Chalk Marker Ink (black) contained in: edding 4085?
edding Chalk Marker Ink (black) contained in: edding 4085 is a liquid with black color. It has odourless odor.
What is the solubility of edding Chalk Marker Ink (black) contained in: edding 4085?
No data available
What is edding Chalk Marker Ink (black) contained in: edding 4085 used for?
Ink for use in felt pens
What are the hazard statements for edding Chalk Marker Ink (black) contained in: edding 4085?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of edding Chalk Marker Ink (black) contained in: edding 4085?
The melting point is No data available and the boiling point is No data available.