Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Lascaux Hard resist
- Product Code
- 2090
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Lascaux Colours & Restauro Barbara Diethelm AG
manufacturer
Zürichstrasse 42, 8306 Brüttisellen
+41 1 807 41 41
Emergency Contacts
Tox Center
+41 1 251 51 51
Emergency Contact
++1 800 468 6942
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Take the casualty into the fresh air and keep warm. Keep at rest. Irregular breathing/no breathing: artificial respiration. Unconsciousness: lateral position - call a physician.
Immediately remove all contaminated clothing. Wash away with soap and water and rinse. Do NOT use solvents or thinners.
Remove contact lenses, keep eyelids open. Flush with plenty of water (10 - 15 min.). Call a physician.
Contact a doctor immediately. Keep at rest. Do not induce vomiting.
Immediate Medical Attention
Call a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol resistant foam, CO2, powders, water spray.
Waterjet.
Fire will produce dense black smoke. Exposure to decomposition products may cause a health hazard.
Cool endangered containers with water in case of fire.
Firefighter Protection
Appropriate breathing apparatus may be required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not empty into drains. If the product contaminates lakes, rivers or sewages, inform appropriate authorities in accordance with local regulations.
Clean preferably with a detergent; avoid use of solvents.
Materials: non-combustible absorbent materials, e.g. sand, earth, vermiculite, diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Do not inhale the vapour. Do not eat or drink during work - no smoking. Comply with the health and safety at work laws. Gas mask in case of spray processing.
Keep container tightly closed. Never use pressure to empty: container is not a pressure vessel. No smoking. Prevent unauthorized access. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Avoid heating and direct sunlight. Keep away from ignition sources. Keep containers dry and cool. Keep containers in a well-ventilated place.
Do not eat or drink during work - no smoking. Comply with the health and safety at work laws.
No smoking. Prevent unauthorized access. Electrical equipment should be protected to the appropriate standard. Floors should be of the conducting type.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction.
If these are not sufficient to maintain concentrations of particulates and solvent vapour below the OEL (=Occupational Exposure Limit), suitable respiratory protection must be worn.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage and handling conditions (See section 7).
oxidizing agents, strongly alkaline and strongly acid materials
carbon monoxide and dioxide, smoke, oxides of nitrogen
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
101 Safety data sheet available for professional user on request.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Lascaux Hard resist?
The signal word is no signal word.
What is the physical form of Lascaux Hard resist?
Lascaux Hard resist is a liquid with slight-brownish color. It has characteristic odor.