Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AMMONIA 24,5% TECHNICALLY PURE
- Chemical Name
- ammonia
Regulatory Identifiers
- CAS Number
- 1336-21-6 Check regulations →
- EC Number
- 215-647-6 Check regulations →
- REACH No.
- 01-2119488876-14-xxxx
- UFI Code
- 7UGD-71TD-W00Y-Q81X
Identified Uses
Identified use: See table in front of appendix for a complete overview of identified uses.
Uses advised against
At this moment we have not identified any uses advised against
Manufacturers & Suppliers
Brenntag N.V.
distributor
Nijverheidslaan 38, BE 8540 Deerlijk
+32 (0)56 77 6944
Brenntag Nederland B.V.
distributor
Donker Duyvisweg 44, NL 3316 BM Dordrecht
+31 (0)78 65 44 944
Emergency Contacts
Antipoison Center - Brussels
+32(0)70 245 245
National Poisoning Information Center - Bilthoven
+31(0) 88 755 8000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ammonia EC: 215-647-6 | 1336-21-6 | 22 - 25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep at rest. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. If breathing is irregular or stopped, administer artificial respiration.
Symptoms: Harmful if inhaled. May cause respiratory irritation.
Wash off immediately with plenty of water.
Symptoms: Causes severe burns. Extremely corrosive and destructive to tissue.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Symptoms: Causes serious eye damage.
Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Do NOT induce vomiting.
Symptoms: If ingested, severe burns of the mouth and throat, as well as a danger of perforation of the oesophagus and the stomach.
Immediate Medical Attention
Call a physician immediately. Consult an eye specialist immediately. Go to an ophthalmic hospital if possible.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. The product itself does not burn.
High volume water jet
Incomplete combustion may form toxic pyrolysis products.
Control smoke with water spray. Cool closed containers exposed to fire with water spray.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Wear appropriate body protection (full protective suit)
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep people away from and upwind of spill/leak.
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders). Keep in suitable, closed containers for disposal.
Materials: sand, diatomite, acid binders, universal binders
Related Products
Similar products with comparable safety profiles
AMMONIA 0.88 SG TECHNICAL
CAS: 1336-21-6
Ammonia solution 24,9%
CAS: 1336-21-6
AMMONIAQUE 20,5% / AMMONIAQUE <25%
---
Ammonia liquid Techn.
CAS: 7664-41-7
Ammonia solution 25%
CAS: 1336-21-6
AMMONIUM DICHROMATE, PURIFIED
---
Ammonia 28,0 - 30,0%, pro analyse
UFI: XW17-JMCT-XK7S-099Y
Ammonia solution S.G. 0.91 (25%)
UFI: CXH5-QF3D-MS2Y-ES0C
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep container tightly closed. Open drum carefully as content may be under pressure. Ensure adequate ventilation. Use personal protective equipment. Avoid contact with skin, eyes and clothing. Do not breathe vapours or spray mist. Use respirator with appropriate filter if vapours or aerosol are released. Emergency eye wash fountains and emergency showers should be available in the immediate vicinity.
Keep tightly closed in a dry and cool place. Keep in a well-ventilated place. Keep away from direct sunlight.
Keep away from food, drink and animal feedingstuffs. Smoking, eating and drinking should be prohibited in the application area. Wash hands before breaks and at the end of workday. Take off all contaminated clothing immediately.
The product is not flammable. Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Refer to protective measures listed in sections 7 and 8.
Protective gloves complying with EN 374. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. Protective gloves should be replaced at first signs of wear. Material: butyl-rubber, Break through time: >= 8 h, Glove thickness: 0,5 mm. Material: Fluorinated rubber, Break through time: >= 8 h, Glove thickness: 0,4 mm
Safety glasses with side-shields conforming to EN166
In case of brief exposure or low pollution use breathing filter apparatus. Use a properly fitted, air-purifying respirator or air complying with an approved standard if a risk assessment indicates this is necessary. Respirator with a full face mask Recommended Filter type:K Equipment should conform to EN 14387
Protecting Clothes: alkali resistant protective clothing Chemical resistant apron Protective clothing against the effects of liquid chemicals (EN 13034). Protective Footwear: Protective footwear according to ISO 20345.
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No decomposition if used as directed.
Corrodes copper and its alloys. Exothermic reaction with strong acids.
Heat
copper and its alloys, strong acids
ammonia
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The PBT or vPvB criteria of Annex XIII to the REACH Regulation does not apply to inorganic substances.
12.6. Endocrine disrupting properties
The substance does not contain components considered to have endocrine disrupting properties at levels of 0.1% or higher.
12.7. Other adverse effects
Harmful effects to aquatic organisms due to pH-shift.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal together with normal waste is not allowed. Special disposal required according to local regulations. Do not let product enter drains. Contact waste disposal services. This product shall be disposed of or recovered in compliance with Directive 2008/98/EC on waste as lastly amended.
Disposal together with normal waste is not allowed. Special disposal required according to local regulations. Do not let product enter drains. Contact waste disposal services.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2672
- Shipping Name
- AMMONIA SOLUTION
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
SDS updated according to Regulation (EU) 2020/878
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for AMMONIA 24,5% TECHNICALLY PURE?
The signal word is danger.
What is the physical form of AMMONIA 24,5% TECHNICALLY PURE?
AMMONIA 24,5% TECHNICALLY PURE is a liquid with colourless, light yellow color. It has ammoniacal odor.
What is the solubility of AMMONIA 24,5% TECHNICALLY PURE?
completely soluble
What is AMMONIA 24,5% TECHNICALLY PURE used for?
Identified use: See table in front of appendix for a complete overview of identified uses.
What are the hazard statements for AMMONIA 24,5% TECHNICALLY PURE?
This substance has 4 hazard statements:
- H314: Causes severe skin burns and eye damage.
- H332: Harmful if inhaled.
- H335: May cause respiratory irritation.
- H412: Harmful to aquatic life with long lasting effects.