Base Stock 130

Remove contaminated clothing and shoes. Wash with soap and water. Handle with care and dispose of in a safe manner.

Symptoms: skin irritation, swelling or redness

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Symptoms: irritation, blurred vision or swelling

Never give anything by mouth to an unconscious person.

Symptoms: Few or no symptoms expected. If any, slight nausea might occur.

Use dry chemical, CO₂, water spray (fog) or foam.

Do not use direct water jets on the burning product; they could cause splattering and spread the fire. Simultaneous use of foam and water on the same surface is to be avoided as water destroys the foam.

In a fire or if heated, a pressure increase will occur and the container may burst. This substance will float and can be reignited on surface water.

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.

Stop leak if safe to do so. Avoid direct contact with the product. Stay upwind/keep distance from source. In case of large spillages, alert occupants in downwind areas.

Normal antistatic working clothes are usually adequate.

Alert occupants in downwind areas. Full body suit of chemically resistant and thermal resistant material should be used.

Prevent product from entering sewers, rivers or other bodies of water. The use of dispersants should be advised by an expert, and, if required, approved by local authorities.

Absorb spilled product with suitable non-combustible materials. Transfer collected product and other contaminated materials to suitable containers for recovery or safe disposal.

Obtain special instructions before use. Hazard of slipping on spill product. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use and store only outdoors or in a well-ventilated area. Do not ingest. Avoid contact with skin. Avoid breathing fume/mist. Use personal protective equipment as required. Prevent the risk of slipping. Take precautionary measures against static discharge. Avoid splash filling of bulk volumes when handling hot liquid product.

Keep containers tightly closed and properly labelled. Protect from sunlight. Storage installations should be designed with adequate bunds in case of leaks or spills.

Ensure that proper housekeeping measures are in place. Contaminated materials should not be allowed to accumulate in the workplaces and should never be kept inside the pockets. Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Wash hands thoroughly after handling. Change contaminated clothes at the end of working shift.

Keep away from heat/sparks/open flames/hot surfaces. - No smoking.

Mechanical ventilation and local exhaust will reduce exposure via the air. Use oil resistant material in construction of handling equipment. Store under recommended conditions and if heated, temperature control equipment should be used to avoid overheating.

8 hours (breakthrough time): nitrile rubber

Recommended: safety glasses with side-shields

Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Use a properly fitted, particulate filter respirator complying with an approved standard if a risk assessment indicates this is necessary.

Body protection: Wear protective clothing if there is a risk of skin contact. Change contaminated clothes at the end of working shift. Other skin protection: Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

Stable under normal conditions.

No specific test data related to reactivity available for this product or its ingredients.

Under normal conditions of storage and use, hazardous reactions will not occur.

Oxidising agent.

extreme heat and oxidizing agents

Incomplete combustion is likely to give rise to a complex mixture of airborne solid and liquid particulates, gases, including carbon monoxide, H2S, SOx (sulfur oxides) or sulfuric acid and unidentified organic and inorganic compounds.

Recycling of used substance is feasible and recommended. This substance can be burned or incinerated, subject to national/local authorizations, relevant contamination limits, safety regulations and air quality legislation.

Disposal can be carried out directly, or by delivery to qualified waste handlers.