AD BASE 6.0cSt

Remove source of exposure or move to fresh air. Get medical attention promptly if person feels unwell.

Take off contaminated clothing, shoes and leather goods (e.g. watchbands, belts). Wash with gently flowing lukewarm water and mild soap for 15 minutes. If skin irritation occurs get medical advice/attention.

Symptoms: If inhaled and/or on skin: may cause mild irritation.

Remove contact lenses, if present and easy to do. Immediately rinse the contaminated eye(s) with lukewarm, gently flowing water for 15-20 minutes, while holding the eyelid(s) open. If eye irritation persists, get medical advice/attention.

Symptoms: If in eyes: mist may cause irritation.

Rinse mouth with water. Do not induce vomiting. If vomiting occurs naturally, have person lean forward to reduce risk of aspiration. Have person rinse mouth with water again. Seek immediate medical attention.

Symptoms: If swallowed: aspiration hazard. If vomited, may enter the lungs causing severe, possibly fatal, effects.

Carbon dioxide, dry chemical powder or appropriate foam. Water spray may be used to keep fire-exposed containers and structures cool.

Do not use solid stream of water as it may spread the fire.

During a fire, irritating and/or toxic substances, such as carbon monoxide, sulfur, nitrogen and phosphorus oxides, reactive hydrocarbons and polycyclic aromatic hydrocarbons (PAHs) may be generated.

Evacuate area. Fight fire from a safe distance or a protected location. Cool down tanks and surfaces exposed to the fire by abundant spraying with water. Isolate the source of combustion and allow to burn out under supervision, or use fire extinguishers where appropriate.

Evacuate and ventilate the area. Remove all sources of ignition. Before entry, especially into confined areas, check atmosphere with an appropriate monitor. Do not touch product or enter areas with high airborne concentration unless wearing appropriate protective equipment (see Section 8). Remove or isolate incompatible materials as well as other hazardous materials.

Do not allow product to enter drains, sewers, ground or waterways. Inform environmental and public safety authorities of a release to the environment.

collect with non-combustible absorbent material. Transfer absorbed material to closed, labelled containers and handle as hazardous waste.

Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth)

Eliminate all ignition sources. Use non-sparking equipment, explosion-proof ventilation systems, and intrinsically safe electrical equipment. Bond and ground containers during product transfer. Do not get in eyes, on skin or on clothing. Avoid release to the environment. Immediately report leaks, spills or failures of the safety equipment (e.g. ventilation system). Prevent contact with incompatible chemicals. Keep containers tightly closed when not in use or empty.

Keep away from heat and sources of ignition. Store only in approved, closed containers in a cool, dry, wellventilated area. Protect containers against physical damage. Use secondary containment and inspect periodically for damage or leaks. Inspect all incoming containers to make sure they are properly labelled and not damaged. Separate from incompatible materials. (e.g., oxygen, chlorine gases).

Eliminate all ignition sources. Use non-sparking equipment, explosion-proof ventilation systems, and intrinsically safe electrical equipment. Bond and ground containers during product transfer.

Stable at normal temperatures and pressure.

May react with oxidizers such as peroxides, nitric acid, and perchlorates.

Heat, sparks, ignition points, flames, static electricity, strong oxidizing agents.

Avoid contact with strong acids and oxidizing agents.

A complex mixture of airborne material will evolve during heating or burning. Carbon monoxide, carbon dioxide, sulfur, nitrogen and phosphorus oxides, reactive hydrocarbons and polycyclic aromatic hydrocarbons (PAHs) may be formed.

Recover or recycle if possible. Waste arising from a spillage or tank cleaning should be disposed of in accordance with prevailing regulations through a recognized collector or contractor.

Recover or recycle if possible. Do not dispose into the environment, in drains or in water courses.