Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEMEST K100SA
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119486801-33-0014
Identified Uses
Plasticizer for industrial uses Binders forpowders Impregnating agents Viscosity regulators Softener Adhesives, sealants Raw material for lubricants and lubricating additives
Manufacturers & Suppliers
KLK TEMIX SPA
manufacturer
Via Mecenate 90, Edificio B, 20138 Milano (MI) Italy
+39 02 5099431
Emergency Contacts
Emergency Contact
+39 02 50 99 431
8 – 18, Monday to Friday
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product does not contain substances classified as being hazardous to human health or the environment pursuant to the provisions Regulation (EC) 1272/2008 (CLP) (and subsequent amendments and supplements) in such quantities as to require the statement.
First Aid Measures
Emergency procedures for chemical exposure incidents
Immediate Medical Attention
In case of more severe symptoms, ask for immediate medical aid.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide, foam, powder and water spray.
None in particular.
HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIRE. Do not breathe combustion products.
Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health.
Firefighter Protection
Always wear full fire prevention gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The product must not penetrate into the sewer system or come into contact with surface water or ground water.
Collect as much material as possible and eliminate the rest using jets of water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Before handling the product, consult all the other sections of this material information sheet. Avoid leakage of the product into the environment. Do not eat, drink or smoke during use.
Keep the product in clearly labelled containers.
Do not eat, drink or smoke during use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If contact with the product is expected, it is recommended to protect your hands with work gloves (see standard EN 374). The following should be considered when choosing work glove material: compatibility, degradation, permeability time. The gloves' wear time depends on the duration and type of use. Protect your hands with gloves of the following type: Material: Nitrile rubber (NBR) The following should be considered when choosing work glove material: compatibility, degradation, permeability time. Thickness: 35 mm Breakthrough time: > 480 min Material: Butyl rubber (IIR) Thickness: 5 mm Breakthrough time: > 480 min
None required.
None required, unless indicated otherwise in the chemical risk assessment.
None required.
The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with environmental standards.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable in normal conditions of use and storage.
There are no particular risks of reaction with other substances in normal conditions of use.
No hazardous reactions are foreseeable in normal conditions of use and storage.
None in particular. However the usual precautions used for chemical products should be respected.
Information not available
Information not available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB.
12.6. Endocrine disrupting properties
The substance is not listed in the main European lists of potential or suspected endocrine disruptors with environmental effects under evaluation.
12.7. Other adverse effects
Information not available
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal must be performed through an authorised waste management firm, in compliance with national and local regulations.
Reuse, when possible.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEMEST K100SA?
The signal word is no signal word.
What is the physical form of TEMEST K100SA?
TEMEST K100SA is a liquid appearing as liquid with yellowish color. It has characteristic odor.
What is the solubility of TEMEST K100SA?
<1 mg/l @23°C, pH=5.5
What is TEMEST K100SA used for?
Plasticizer for industrial uses Binders forpowders Impregnating agents Viscosity regulators Softener Adhesives, sealants Raw material for lubricants and lubricating additives
What is the melting point of TEMEST K100SA?
The melting point is -50 °C and the boiling point is 346 °C.