Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RADIASURF 7175
- Product Form
- Substance (UVCB)
- Chemical Name
- Fatty acids, C16-18 (even numbered), esters with pentaerythritol
Regulatory Identifiers
- CAS Number
- 85116-93-4 Check regulations →
- EC Number
- 285-547-5 Check regulations →
- REACH No.
- 01-2119531112-58
Identified Uses
General overview of industrial uses of polyols fatty esters General overview of professional uses of polyols fatty esters General overview of consumer uses of polyols fatty esters General overview of manufacturing uses of polyols fatty esters General overview of formulation uses of polyols fatty esters
Manufacturers & Suppliers
OLEON N.V.
manufacturer
Assenedestraat 2 BE 9940 Ertvelde
+32 9 341 10 11
http://www.oleon.com
Emergency Contacts
SGS ERS; Oleon contract nr 76858
+32 3 575 55 55
24/7
SGS ERS; Oleon contract nr 76858
+1 888 765 6554
24/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Fatty acids, C16-18, esters with pentaerythritol
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fatty acids, C16-18, esters with pentaerythritol EC: 285-547-5 | 85116-93-4 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air. Respiratory problems: consult a doctor/medical service.
Wash off immediately with soap and plenty of water. If irritation persists, consult a doctor.
Rinse immediately with plenty of water. Consult an ophthalmologist if irritation persists.
Rinse mouth out with water. Get medical advice/attention if you feel unwell. Call a poison center (www.who.int/ipcs/poisons/centre/directory/en).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
AFFF foam. BC-powder. Carbon dioxide. Dry sand. Dry chemical powder. Use the extinguishing media recommended for the burning materials and fire situation.
Do not use water jet.
DIRECT FIRE HAZARD: Not easily combustible. In finely divided state: increased fire hazard. INDIRECT FIRE HAZARD: Temperature above flashpoint: higher fire/explosion hazard. DIRECT EXPLOSION HAZARD: Fine dust dispersed in air may ignite. INDIRECT EXPLOSION HAZARD: Dust cloud can be ignited by a spark.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mark the danger area. Prevent dust cloud formation, e.g. by wetting. Dust production: have neighbourhood close doors and windows. Exposure to fire/heat: have neighbourhood close doors and windows.
Prevent soil and water pollution.
Carefully collect the spill/leftovers. If melted: allow liquid to solidify before taking it up. Scoop solid spill into closing containers or synthetic bags. Clean contaminated surfaces with a soap solution. Flush/dilute with water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
≥ 10 °C above melting point
Keep container in a well-ventilated place. Store at ambient temperature. Keep out of direct sunlight. Meet the legal requirements.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves. Good resistance: Nitrile rubber
In case of dust production: protective goggles.
Dust production: dust mask with filter type P2.
Protective clothing. Materials for protective clothing: Good resistance: Nitrile rubber
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
On burning: release of carbon monoxide/carbon dioxide.
No additional information available
No supplementary information available.
No supplementary information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The product is not considered harmful to aquatic organisms nor to cause long-term adverse effects in the environment.
12.2. Persistence and degradability
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Endocrine disrupting properties
The substance is not identified as having endocrine disrupting properties in accordance with the specified EU regulations.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Scoop solid spill into closing containers,Powdered: do not use compressed air for pumping over spills,Clean contaminated surfaces with a soap solution
Remove to an authorized waste treatment plant.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RADIASURF 7175?
The signal word is no signal word.
What is the physical form of RADIASURF 7175?
RADIASURF 7175 is a solid appearing as solid in various shapes. with white to slightly yellow. color. It has characteristic. almost odourless. odor.
What is the solubility of RADIASURF 7175?
Not available
What is RADIASURF 7175 used for?
General overview of industrial uses of polyols fatty esters General overview of professional uses of polyols fatty esters General overview of consumer uses of polyols fatty esters General overview of manufacturing uses of polyols fatty esters General overview of formulation uses of polyols fatty esters
What is the melting point of RADIASURF 7175?
The melting point is ca. 52 °C and the boiling point is > 250 °C.