Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BASE OIL N150
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119484627-25-0048
Identified Uses
Base oil for manufacturing of lubricating oil.
Manufacturers & Suppliers
STR Tecoil Oy
manufacturer
Paksuniementie 15-17, 49460 Hamina
+358 45 1674111
Emergency Contacts
Poison Information centre
+358 9 471977
24 h daily
Poison Information centre
+358 9 4711
24 h daily
Emergency Contact
112
24 h daily
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy paraffinic EC: 265-157-1 | 64742-54-7 | 100% | No |
DMSO < 3 % (IP 346), so the substance does not need to be classified as carcinogenic.
First Aid Measures
Emergency procedures for chemical exposure incidents
If respiratory symptoms develop, move victim away into fresh air. Keep the patient warm and at rest.
Symptoms: Oil mist may irritate respiratory organs.
Remove soiled clothing. Wash the skin with mild soap and plenty of water.
Symptoms: May cause drying of the skin. Prolonged and/or repeated skin contact may irritate skin.
Rinse with water carefully for at least 15 minutes, keeping the eyelids open. If possible, remove contact lenses and continue rinsing the eye.
Symptoms: May irritate eyes.
DO NOT INDUCE VOMITING. If the patient vomits, help to keep the head down so that no aspiration to lungs will occur.
Symptoms: Ingestion may cause nausea and diarrhea.
Immediate Medical Attention
If the situation is unclear or symptoms persist, seek medical attention.
Medical Treatment
No special instructions.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, water mist, dry chemical, carbon dioxide, sand or earth.
Do not use water jet as an extinguisher, as this may spread the fire.
Incomplete combustion may form organic and inorganic particles or fumes which may be harmful. Heated containers may rupture, explode or be thrown into the air.
Keep storage containers cool with water spray.
Firefighter Protection
In large fires or in confined areas, use appropriate protective equipment and a self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Plug the leak if it can be done safely. Restrict access to the area.
Prevent entry into sewers, soil and waterways.
collect in suitable containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practices. Avoid skin contact and breathing vapours. Smoking, open fire and hot work are prohibilited in the vicinity of handling the substance. Static electricity and formation of sparks must be prevented.
Store in cool, dry, well ventilated area
Wash hands and exposed skin areas before breaks and after handling the product. Wash/clean contaminated clothes, shoes and personal protective equipment before reuse.
Smoking, open fire and hot work are prohibilited in the vicinity of handling the substance. Static electricity and formation of sparks must be prevented.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, it is recommended to use local air extraction indoors. If general ventilation is not adequate to keep airborne concentrations under given occupational exposure limits, local exhaust ventilation must be used. Personal protection equipment should be chosen according to the CEN standards.
Use appropriate chemical resistant gloves. EN374
If there is a danger of splashes, use safety goggles. EN166.
If airborne concentrations exceed recommended exposure limits, approved respiratory protective equipment should be worn (combination filter, class A/P2).
Wear protective clothing made of antistatic material.
Prevent entry into sewers or the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Chemically stable under normal storage conditions.
Not reactive under normal use and storage conditions.
No hazardous reactions under normal use and storage conditions.
None.
May react with strong oxidising agents.
Burning may produce toxic or corrosive gases, such as carbon monoxide, nitrogen oxides and sulfur dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB according to current EU criteria.
12.6 Endocrine disrupting properties
No endocrine disrupting properties known.
12.7. Other adverse effects
The substance is classified as German water hazard class WGK 1, indicating low hazard to the aquatic environment.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal according to current national and local official regulations.
Disposal according to current national and local official regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No specific regulations
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BASE OIL N150?
The signal word is no signal word.
What is the physical form of BASE OIL N150?
BASE OIL N150 is a liquid appearing as viscous, oily, clear, slightly yellow liquid. . It has odourless. odor.
What is the solubility of BASE OIL N150?
Not determined.
What is BASE OIL N150 used for?
Base oil for manufacturing of lubricating oil.
What is the melting point of BASE OIL N150?
The melting point is Not determined. and the boiling point is ca. 366 – 557 °C.